october2021 - 6

Welcome to Sneak Peek!
This section features recently
introduced automotive tools and
equipment. See new products even
before automotive technicians read
about them in PTEN magazine.
CONTOURED CHANNELS ROUTE MOISTURE AWAY FROM EYES
The Brass Knuckle Crusher Safety Goggles, No. BKDST-1020NP, feature contoured channels
along the brow line to move water and sweat away from the eyes, while a rubber gasket
seals the glasses snugly against the face. The gasket also provides anti-dust protection.
The goggles include the company's proprietary N-Fog Plus anti-fog technology to offer
ideal performance under heat and humidity for a long-lasting, fog-free view. With a wraparound
style, the one-piece 10 base curve
lens offers high-impact protection
and an unobstructed field of vision.
Super-flex temples hug any size face
and TempleTouch technology comfortably
grips the sides of the head
with molded-in nibs behind the ears. n
FOR GM 5/16 " EVAP
LINE SYSTEMS
The OTC EVAP Access Port Tool, No.
6787, is designed to connect into the
EVAP system line at the canister quickconnect
fitting, allowing for EVAP system
testing and diagnosis. It's recommended
for use with the OTC LeakTamer
Smoke Machine, No. 6522, to perform
flow testing and leak testing based on
service information procedures. The
tool is suitable for all GM 5/16 " EVAP
line systems. n
IDEAL FOR LIGHT,
MEDIUM, AND HEAVY DUTY
VEHICLES
The Launch Tech USA X-431 Torque
AutoHD is designed for diagnosing
automotive and light, medium, and
heavy duty vehicles. It has the ability to
read and erase DTCs of Class 4 through
Class 8 commercial vehicles such as
Cummins, Detroit, Freightliner, and more.
The X-431 Torque AutoHD comes with an
Android 9.0 system and Octa-core processor.
Notable features include: wireless
Bluetooth communication, optional
ADAS calibration, code assist by Identifix
for automotive vehicles, and bidirectional
controls. n
AUTO SHUT-OFF WHEN
RECOVERY IS COMPLETE
The JB Industries F6-BOOST BLDC
Ignition-Proof Refrigerant Recovery
Unit is designed to provide users fast, reliable
refrigerant recovery of ARHI groups III,
IV, and V refrigerants. Its two-cylinder, oilless
compressor and long-lasting pistons
are housed in a lightweight, ergonomically
designed, and easy-to-use unit. The unit
features built-in purge functionality to prevent
cross-contamination, non-pressurized
vented crankcase to prevent the refrigerant
from damaging bearings or seals, auto
shut-off when recovery is complete, status
indicator light, and an easy-to-use interface
with 2 " high/low gauges. It has a recessed
folding handle with rubber grip and padded
shoulder strap as well as a 10' locking power
cable and Velcro cord wrap. n
AVAILABLE IN SIX COLORS
The U.S. General 34 " 6-Drawer Full
Bank Service Carts from Harbor
Freight are designed to last with a onepiece,
fully welded body for maximum
strength and a chemical-resistant and
scratch-resistant powder coat finish
to withstand years of use. To prevent
accidental dings, dents, and scratches
around the shop, the carts offer builtin
impact resistant corner guards. They
also feature gas struts that open to a
full 90 degree angle, internal pry bar
storage system, pass-through ports,
six full width drawers with heavy duty
ball bearing slides, integrated locking
system, non-slip liners, and four swivel
casters (two that lock). The carts
are available in six colors: red, black,
orange, yellow, blue, and green. n
BUNDLE IT
Body shops can use the F6-BOOST BLDC Ignition-Proof Refrigerant Recovery unit to
prevent cross contamination of R134a and R1234yf when removing refrigerant loop
components from collision-involved vehicles. It can be carried aboard the US General
34 " 6-Drawer Full Bank Service Cart. The Crusher Safety Goggles, NO. BKDST-1020NP
will keep technicians protected from refrigerant oils and debris that are encountered
during repair.
6 Professional Distributor I October 2021 I VehicleServicePros.com

http://www.VehicleServicePros.com

october2021

Table of Contents for the Digital Edition of october2021