Professional_Tool_And_Equipment_News_December_2019 - 54

Power Tools & Air Tools

BUILT-IN BRAKE PREVENTS
ANVIL FROM SPINNING

COUPLER AND
BLOW GUN COMBO
The Coilhose CoBlo is a combination quick
coupling and blow gun in one. The unit is
convenient for metalworking or woodworking operations, which often produce
shavings or sawdust making it difficult to
view the work surface. A quick burst or two
from the CoBlo allows the operator to get
back to work quickly without having to
disconnect the tool, connect a dedicated
blowgun, and then reconnect the tool.
The CoBlo can be used with an air tool
connected or disconnected and is currently
available in 1/4" industrial, automotive, and
ARO interchanges.

Circle 151 on card, or enter at "e-inquiry" on
VehicleServicePros.com

OFFERS TORQUE RANGE OF
180 TO 1,400 FT-LBS
The Michigan Pneumatic Tool Venom
Impact Wrenches were engineered for performance and designed for durability. The
line includes 1/2", 3/4", and 1" drive pistol
impacts, in addition to a 1/2" drive angle
impact, and offers torque ranges from 180
to 1,400 ft-lbs. The lightweight composite
design and aluminum clutch housing
provide a balance of power and durability.
Additional features include quiet handle
exhaust, textured grip, and single-handed
slide forward/reverse.

The Snap - on 14 . 4V 1/4" Drive
MicroLithium Cordless Impact Wrench
Kit, No. CT725, features 70 ft-lbs of torque
output and a variable-speed digital togglestyle trigger. The unit has a built-in brake
to prevent the anvil from spinning and a
built-in fuel gauge. It has a 70 minute charge
time and twin-beam LEDs. The kit includes
two batteries and a charger.

Circle 153 on card, or enter at "e-inquiry" on
VehicleServicePros.com

Circle 152 on card, or enter at "e-inquiry" on
VehicleServicePros.com

REMOVE STUBBORN BOLTS IN
HARD-TO-REACH AREAS
The Astro Tools 1/2" and 3/8" ONYX Nano Angle
Impact Wrenches, Nos. 1832 and 1838, are designed
to offer the power to remove stubborn bolts in difficult
to reach areas. With a full head length of 3.46" and a
long reach handle, these tools fit into confined spaces
with a slim profile. These tools offer 415 ft-lbs of
maximum torque and offer enough power for a variety
of applications.

Circle 155 on card, or enter at "e-inquiry" on
VehicleServicePros.com

ABLE TO BE HELD FROM
DIFFERENT ANGLES AND POSITIONS
The DeWalt 20V MAX XR 7" Variable Speed Rotary Polisher,
No. DCM849, features a high-efficiency brushless motor and
achieves a no-load speed of 800-2200 rpm with a variable speed
trigger and dial. It can be held either by its side or bail handle,
allowing it to be held at a variety of angles and positions. The tool
also features rubber molding, including in key areas to protect
work surfaces. The battery housing is oriented horizontally so
that the foot of the tool doesn't interfere with polishing,
and to allow the user to get as close
to the surface as possible. The
tool weighs 4.7 lbs and is
16" long.

Circle 154 on card, or enter at "e-inquiry" on VehicleServicePros.com

54

PTEN

DECEMBER 2019

www.VehicleServicePros.com

Circle 156 on card, or
enter at "e-inquiry" on
VehicleServicePros.com

http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://iatn.net http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com

Professional_Tool_And_Equipment_News_December_2019

Table of Contents for the Digital Edition of Professional_Tool_And_Equipment_News_December_2019