April_2022 - 54

LT1900 Series Shockit Sets Are
Great Because They Work!
L
T1900 Series Shockit Crows Foot & Line Wrench Sets
utilize air hammer power to loosen and remove frozen
nuts, bolts and hydraulic fittings. They provide access
where impact hammers, breaker bars, ratchets, wrenches
and traditional crow's feet and line wrenches won't.
The magic of LT1900 Series Shockit Sets is due to the hypersonic vibration
of the air hammer passed through a Shockit Punch to the fastener.
Vibration over torque gets the job done. Many techs fear using an air
hammer to remove a frozen fastener to avoid the danger of breaking
a fastener resulting in a bigger problem. During development of our
offset non-turning 8mm radius tip Shockit Punches, we realized the
weight and thickness of the shaft diameter prevented air hammers
from over powering the fastener.
LT1900 (10 Pc., SAE sizes 3/4 " to 1-5/16 " ) and LT1910 (10 Pc., Metric
sizes 14mm to 24mm) Shockit Crows Foot Sets allow easy access
to hydraulic fittings, nuts and bolts. LT1920 (13 Pc., SAE sizes 1/4 "
to 1 " ) and LT1930 (12 Pc., Metric sizes 6mm to 17mm) Shockit Line
LT855A Texas Twister Air Hammer Pulling Kit
TM
NO MORE SLIDE HAMMERS!
p LT1900 10 Piece SAE Shockit Crows Foot Set
Wrench Sets eliminate the need for subframe removal when working
on steering rack hydraulic lines.
The LT1910P 11 " Standard Shockit Punch is NOW included with every
LT1900 Series Shockit Set at NO ADDITIONAL COST. LT1900 Series
Shockit Sets must be used with Shockit Punches for maximum performance
and warranty coverage. A 3 pc. Shockit Punch Kit (LT1910PK) and
other individual Shockit Punches, 5.5 " short (LT1910PS) and 22 " long
(LT1910PL) are available to access the most difficult to reach fasteners.
See your mobile tool distributor today and start removing any frozen
or obstructed fastener The Shockit Way! n
LOCK TECHNOLOGY, INC.
www.ltitools.com
Circle 71 on card, or click " PTEN e-inquiry " on VehicleServicePros.com
SPECIAL ADVERTISING SECTION
TOOLS THAT GET THE DIFFICULT JOBS DONE SAFE, FASTAND EFFICIENT!
LT994 Shockit Socket O2 Sensor Removal Kit
Now you can convert your air hammer into a pneumatic slide hammer. Pull axles, seals, diesel injectors,
bearings, pulleys, harmonic balancers, axle pinion flanges, old distributors & much, much more.
Connect to your specialty pullers and Vise grips.
Patent #7,036,211.
Patent #7,677,143
Shockit Sockets to easily access, loosen, and remove frozen and obstructed O2 sensors and hard-to-access
diesel NOx sensors. Works when ratchets, wrenches and regular sockets don't fit. No more catalytic
converter removal or dropping motor mounts to access O2 sensors. Includes a 22mm low profile Shockit
Socket for limited access O2 sensors a 22mm long profile Shockit Socket for deep recessed Ford, Toyota
and Lexus applications a 18mm bottoming tap/die for re-threading damaged male/female threads and a
Shocket Punch (LT1910P). Additional Shockit Punch sizes available - see Shockit Punch Kit section.
air hammer
not included
Scan to see!
LT855-AH Texas TwisterTM Bidirectional Air Hammer
d
Use as a hammer or use as a puller - ouble duty air hammer. Just install the
included air lock plug into quick release chuck in front of air hammer to
convert to pneumatic puller. Works with LT855A Texas Twister Air Hammer
Pulling Kit accessories. Unlimited applications in automotive, aircraft, marine
repair, farm implement maintenance, manufacturing industries.
TM
Air Lock
Plug
Scan to see!
LT1350 Lug Ripper II
NOW AVAILABLE AGAIN
In use w/855-2A
seal remover
(not included)
Patent #7,036,211
Patent #10,549,355 B1
Don't torch frozen/damaged lug nuts off - just drill out the lug nut threads
and the wheel stud ONLY in 11 minutes or less. Easily replace damaged lug
nut and wheel stud without damaging rim.
.
LT1350-8 Water Bladder is
LT1940 Series Kentucky Kicker Shockit Driver Kits
NEW & IMPROVED LT1350-6
16mm STEP UP COBALT DRILL BIT
Drills out the
Scan to see NEW
drill bit work!
lug nut threads and
the wheel stud only!
LT886 Radiator Rocket Coil & Line Cleaner
Patent Pending
Clean cooling coils for radiators, transmission lines, oil and fuel lines, air aftercoolers,
condensers, evaporators and much more
. IDEAL FOR TRANSPORT, MUNICIPAL,
AGRICULTURE, INDUSTRIAL AND HD TRUCKS. Can be configured in 3 foot; 2 foot;
or 1 foot lengths Eliminates need for vehicle jacks or lifts to access buried coils
Designed for shop and field use
REMOVABLE BRUSH BAR
Scan to see!
THIS ROCKET RUNS ON AIR POWER!
4 " AIR
SLOT
..
. CAN ALSO BE USED WITH WATER.
LT1910PK Shockit Punch Kit
Scan to see!
Patent Pending
Offset design. Non-turning slots. 8mm radius Shockit Punch tips are designed to fit precisely into indexed
holes on all Shockit tools for maximum performance and warranty coverage. Kit includes:
Short Punch, LT1910P - 11 " Standard Punch & LT1910PL
Innovator of Great Ideas
Circle 72 on card, or click " PTEN e-inquiry " on VehicleServicePros.com
2204PTEN_Casey Tool - Lock Tech.indd 1
3/24/22 9:56 AM
- 5.5 "
- 22 " Long Punch. Punches also sold separately.
LT1910PS
Apply air hammer hyper sonic vibration and torque to any impact socket. Drive Plug
Breaker Bar allows breaker bar & air hammer simultaneous operation. Low Profile Drive
Plug allows for use in tight spaces with an air hammer. Indexed holes designed to keep
Shockit Punches from slipping off driver. 3 drive sizes available.
Shockit Punch now included in every kit at no additional cost. Additional Shockit
Punches sold separately - see Shockit Punch Kit section. Patent #7,677,143.
LT1910P 11 " Standard
Scan to see!
LT1900
LT1910
LT1920
LT1930
10 Piece SAE Shockit Crows Foot Set
10 Piece Metric Shockit Crows Foot Set
13 Piece SAE Shockit Line Wrench Set
12 Piece Metric Shockit Line Wrench Set
hydraulic fittings, nuts & bolts. Shockit Line Wrench Sets -
every set at no additional cost.
Scan to see!
Patent #7,677,143
IN USE
Uses the force and vibration of an air hammer. Indexed holes keep Shockit Punches from slipping off crows
foot & line wrench. Shockit Crows Foot Sets -
HD INDUSTRIAL/HYDRAULIC FITTINGS
AUTOMOTIVE/HYDRAULIC FITTINGS
- easy access to
- avoid
subframe removal for hydraulic line work.
Additional Shockit Punches sold separately - see Shockit Punch Kit section.
LT1910P 11 " Standard Shockit Punch now included with
NEW
PRODUCT
NEW
PRODUCT
NEW&
IMPROVED
NEW
PRODUCT
NEW
PRODUCT
RADIATOR
RR
ROCKET

http://www.ltitools.com http://www.VehicleServicePros.com http://www.ltitools.com http://www.VehicleServicePros.com

April_2022

Table of Contents for the Digital Edition of April_2022