February_2022 - 56

Battery Service Tools
SECURELY SUPPORTS 2,400 LBS
The BendPak SL24EVT EV Battery Pack and Powertrain
Lifting System is designed to help technicians
safely and efficiently remove, service, and install
heavy electric vehicle battery packs or internal
combustion powertrain components. Compact and portable,
it has a pallet-jack type steering wheel and oversized
urethane casters to provide low rolling resistance and
unparalleled maneuverability. With a press of the
button on the pendant controller, the SL24EVT
elevates to more than 6' in less than 20 seconds.
The lift table securely supports 2,400 lbs on its oversized
40 " by 60 " cushioned rubber platform. The SL24EVT is
powered by a maintenance-free 12V deep-cycle battery and
includes a fully automatic three-stage battery charger.
128
FEATURES A FULLY
AUTOMATIC OPERATION
The Clore
Automotive
Updated
FOR MOST COMMON BATTERIES
The OEMTOOLS 6-pc Battery Service Kit, No.
25110, features the tools needed for service and
maintenance for most common batteries. The
kit includes a battery terminal puller, four-way
post cleaner, 5/16 " and 10mm battery terminal
wrench, battery nut pliers, extended 5/16 "
battery terminal wrench, and a side terminal
brush. All the tools are packed into a heavy
duty, roll-up sleeve for easy storage, organization,
and transport.
129
Pro-Logix 12V 1.5A Underhood Battery
Charger/Maintainer, No. 1002, from Solar
combines a fully automatic operation, a
permanent mount design, and the ability to
properly charge virtually any lead acid
battery type, including conventional, AGM,
gel cell, spiral wound, deep cycle, and
marine batteries. The updated 1002 utilizes
advanced microprocessor-controlled logic
to deliver a fully automatic, precisely controlled
charging routine to optimally charge
and maintain each battery serviced.
Additionally, it features over-voltage protection,
reverse polarity protection, and battery
fault detection as well as includes three
output options: clamps, rings, or 12V male
adapter.
131
Every Toolbox Needs...
TM
SINCE 1908
Tap Extractors
& Tap Extensions
TAP EXTRACTORS
* Remove broken taps simply and safely - no drilling,
lasers, damaged threads, scrapped parts or repair inserts.
* Available in every tap size, both inch and metric.
Available as sets or
individual pieces.
TAP EXTENSIONS
* Extend the reach of regular-length taps and allow tapping in
deep holes and awkward locations.
* Square and round sockets conform to leading tap sizes.
* Suitable for both machine- and hand-tapping.
MADE IN
U. S. A.
www.WaltonTools.com
Tapping into good ideas for over 110 years.
(860) 523-5231
sales@waltontools.com
Circle 130 on card, or click " PTEN e-inquiry " on
VehicleServicePros.com
56 PTEN FEBRUARY 2022 www.VehicleServicePros.com
RATED CAT III 600V
The Power Probe Amp Clamp AC/
DC Meter, No. PPDCM80, is an 80A,
auto-ranging
clamp meter
designed for the automotive technician.
The meter is rated CAT III
600V and can measure volts, amps,
ohms, frequency, and temperature.
The meter's diagnostic applications
include, but are not limited to,
parasitic draw and HVAC temperature
testing. Additionally, it has a
jaw size of .9 " , a worklight, and a
large LCD display backlight.
132
http://www.WaltonTools.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com
February_2022

Table of Contents for the Digital Edition of February_2022
