May_2022 - 13
25200 ADJUSTABLE BRAKE CALIPER TOOL, 2 & 3 PIN
Double-ended adapter features a 2 pin side and 3 pin side.
Easily adjustable and used to rewind brake pistons back into
the caliper. Slim profile design and fully adjustable rotating
body aligns the pin location for engaging into the brake caliper
piston face on most domestic and import vehicles. Adapter
will work on right or left hand rewind calipers. 2 Pin range is
from 1/2 " (12.7mm) to 1-1/2 " (38mm). 3 Pin range is from 1 "
(25.4mm) to 1-11/16 (43mm). Use with a 3/8 " square drive.
24780 HUB REMOVER
Time saving tool that safely removes frozen hub assemblies
without damaging other suspension components. Fits on most
5, 6 and 8 lug hub assemblies found on cars and trucks. Bolt
the 1/2 " thick driving plate to the hub using the hardened
washers and existing lug nuts. Insert the hardened acme
threaded forcing screw to push against a solid surface to
loosen the hub assembly. To completely remove hub the forcing
screw must push from a least two different solid points.
72610 MANIFOLD DRILL TEMPLATE FOR FORD 3.5L ECOBOOST
Removes broken exhaust manifold bolts on Ford 3.5L Ecoboost
motors without damaging the cylinder head. Tapered bolts center
base plate over bolt holes and slip fit bushing allows you to
move from hole to hole without moving base plate. The screw
extractor is then used to remove the broken bolt. Includes
bushing to drill to tap size when extractor cannot be used.
40030 BRAKE SPRING BAR
Replaces brake shoes on heavy-duty tractor and trailer S-cam
brakes. Slip the hook into retaining spring loop and press down
against the axle to remove spring. Lever action against the axle
eliminates need for wrenches, pry bars and screwdrivers. Tool
is 18 " long with a molded handle for comfort. The tool has a
black oxide finish.
38800 NO SPLATTER PAD WITH SUPPORTS
No splatter pad and steel supports protect work area from
messy oil splatter. Insert the two steel support braces and
splatter pad into your existing 17972 4.5 Gallon Oval Drain
Pan, Black before an oil change to eliminate oil spills. The
porous material of the splatter pad allows fluid to quickly pass
through into the pan. The pad material resists engine oil,
transmission fluid, coolant, brake fluid, brake cleaner, gear oil
and other solvents. Important: Not for coolants or fluids that will
be recycled in the vehicle. Material fibers of splatter pad may
contaminate the fluid.
49600 SPRAY GUN HOLDER
Securely attaches to ferrous metal surfaces like spray booth
walls, mixing room walls, workstation cabinets and more.
Magnet keeps the holder from sliding when loaded. Comes
with holes so it can be mounted to a wall. Can also be used to
hold other tools.
83600 HSS DRILL BITS, 6 PC.
M2 High Speed Steel Drill Bits. Set includes 2 each of the
following jobber length size drill bits: 1/8 " , 1/4 " and 5/16 " . Each
size is housed in a plastic tube for easy storage.
77070 24MM HARMONIC BALANCER SOCKET
This heavy-duty impact socket is designed with more than
three times the standard socket mass to direct more energy
to removing the bolt. Can be used on GM LS engines that use
a 24mm hex pulley damper bolt or other 24mm applications.
Heat-treated, impact-quality alloy steel. Use with 1/2 " drive.
83700 TRIM REMOVAL SET, 5 PC.
Designed to remove fasteners on door panels and other trim
pieces on a vehicle without damage. The five-piece set comes
with both u notch and v notch ends to fit numerous different
style and size panel clips. The smooth shaft is made from
stainless steel and provides a fulcrum point to lift the clips.
Tools can be stored in plastic tray.
80420 SELF LOCKING RUBBER GASKET TOOL
Rounded and polished steel tip slides the self-locking part of the
rubber gasket into the locking channel. The shape of the steel
tip is designed without sharp edges that could cut the gasket
and features the proper shape needed to perform the job.
Ergonomic handle provides the necessary leverage needed.
83640 1-1/2 " STAINLESS STRAIGHT BLADE SCRAPER
83650 1-1/2 " STAINLESS OFFSET BLADE SCRAPER
Rigid stainless-steel blade extends through the handle to
the metal capped end for strength and durability. The 1-1/2 "
blade width with a soft grip handle and hammer end is good
for removing windshield stops and rust on disc brake caliper
brackets. Also removes carbon from turbo vanes, urethane,
gaskets, and many other applications. The offset blade design
works in hard-to-reach places.
© 2022 Lisle Corporation
LisLe Corporation * po Box 89 * CLarinda, ia 51632-0089 * 712-542-5101 * Fax 712-542-6591 * www.lislecorp.com
Circle 20 on card, or click " PTEN e-inquiry " on VehicleServicePros.com
Table of Contents for the Digital Edition of May_2022
May_2022 - 1
May_2022 - 2
May_2022 - 3
May_2022 - 4
May_2022 - 5
May_2022 - 6
May_2022 - 7
May_2022 - EDITOR'S NOTE
May_2022 - 9
May_2022 - NEW PRODUCTS
May_2022 - RSC1
May_2022 - RSC2
May_2022 - 11
May_2022 - 12
May_2022 - 13
May_2022 - 14
May_2022 - 15
May_2022 - 16
May_2022 - 17
May_2022 - 18
May_2022 - 19
May_2022 - 20
May_2022 - 21
May_2022 - DIAGNOSTIC TECH
May_2022 - 23
May_2022 - 24
May_2022 - 25
May_2022 - TOOL BRIEFING
May_2022 - 27
May_2022 - 28
May_2022 - 29
May_2022 - 30
May_2022 - 31
May_2022 - 32
May_2022 - 33
May_2022 - TOOL REVIEWS
May_2022 - 35
May_2022 - 36
May_2022 - 37
May_2022 - CATEGORY SPOTLIGHT
May_2022 - 39
May_2022 - 40
May_2022 - 41
May_2022 - 42
May_2022 - 43
May_2022 - 44
May_2022 - 45
May_2022 - 46
May_2022 - 47
May_2022 - 48
May_2022 - 49
May_2022 - BIG-TIME BOXES
May_2022 - 51
May_2022 - 52