PTEN_0721 - 31

FOR MORE INFORMATION ON THESE PRODUCTS,
CLICK ON " PTEN E-INQUIRY "
at VehicleServicePros.com
OR CIRCLE THE NUMBER ON THE CARD.
EQUIPPED WITH
A NOVEL LOCKING
SPINDLE SYSTEM
The Chicago Pneumatic CP74 Pneumatic
Die Grinder Series is designed to optimize
productivity and operator comfort. Delivering
up to 20 percent more power than the CP91
range and with a collet design for quick and
easy burr changes, the CP74 pneumatic die
grinders can help optimize productivity in
metal fabrication applications, as well as
vehicle servicing and repair. The CP74 Series
of 1/4 " and 6mm pneumatic die grinders offer
six different heads, including short/long and
straight/angle (120 degree, 90 degree). The
die grinders operate between 22,000 and
28,000 rpm depending on the model. With
the smallest grinder in the series weighing 1.1
lbs and the largest grinder 2.43 lbs.
121
1/4 " DROP AND LOAD HEX
FOR QUICK BIT CHANGES
The Mac Tools 12V Max 1/4 " BL Impact
Driver, No. MCF801, measures 5.05 " and
weighs 1.77 lbs. Its BL-SPEC brushless motor
delivers 200 ft-lbs breakaway torque. The
tool features impact assist three-speed
switch technology for forward and reverse
control as well as
a 1/4 " drop
and load hex
for quick bit
changes.
It
also offers three
LED ring, stainless
steel mesh vents for
durability, and R-SPEC
glass-filled nylon housing
for solvent
resistant
durability.
122
POWER OR MANUAL DRIVEN
The Vessel Ball Grip Cordless Screwdriver,
No. 220USB-1U, is a battery powered/
rechargeable or manually driven
cordless Ball Grip screwdriver
with enough torque for tough
jobs in the automotive industry.
When power driven, it delivers up
to 17.7 lbf-in torque and withstands
up to 88.5 lbf-in torque
when manual driven. The tool is
compact and features an easy-touse
Ball Grip, charging port and
charging indicator with a slide on/off
switch, and a built-in LED. It comes
with a 1/4 " hex bit, along with a USB
charging cord with instructions for
use and charging.
123
Professional Hand Tools
THREE TIME
SAVING 7 " BLOW GUNS
The Innovative Products of America 3-pc
Specialty Blow Gun Assortment, No. 8055,
includes a blow-back model, air-bender
model, and an air-scraper model. The
BlowBack Gun dislodges and evacuates
debris from the bottom of a bolt hole and
out of all the threads. The Air Bender Blow
Gun reaches hard-to-access areas with a
focused, high-pressure, 90-degree angle
output. The Air Scraper Blow Gun is used to
remove gasket materials hardened to a surface.
The stainless-steel shaft and hardened
scraper tip combine air pressure and scouring
action to remove and blow away stuckon
debris quickly. The blow gun tubes are
3/8 " in diameter, 7″ in length, and made
from anodized aluminum and stainless
steel.
124
Circle 125 on card, or click " PTEN e-inquiry " on VehicleServicePros.com
2107PTEN_BetaTools.indd 1VehicleServicePros.com JULY 2021 PROFESSIONAL TOOL & EQUIPMENT NEWS 31
6/16/21 3:11 PM
When size matters, we have you covered for all your
tightening needs, no matter how big or small!
For more information talk to your Beta Tools distributor or visit us at:
www.betatoolsusa.com
920A/C20X
10 mm - 32 mm
920ASL/SB11
1/2 " - 1 1/16 "
42AS/17
1/4 " - 1 1/8 "
42NEW/SP15
6 mm - 24 mm
contact@betatoolsusa.com
717-449-5044

http://www.VehicleServicePros.com http://www.betatoolsusa.com http://www.VehicleServicePros.com http://www.1VehicleServicePros.com

PTEN_0721

Table of Contents for the Digital Edition of PTEN_0721