DRAINAGE Width/Length m (ft) Core/Net/Mesh [4] Thickness ASTM D5199 mm (mil) Compressive Strength ASTM D6364 kPa (psi)/% deflection at yield◆ Gradient = 0.1 Pressure = 10kPa 209 lb/ft2 m2/s (gal/min/ ft) m2/s (gal/min/ft) Transmissivity ASTM D4716-87 [5] Geotextile Attached (Y/N) [3] Core/Net/Mesh Polymer Composition [2] Structure [1] Product Name GEONETS N 4.4/91.7 (14.5/300) 5.5 ± 0.5 (220 ± 20) NP 5.0 x 10-3 (2.41) 1.2 x 10-3 Gradient = 1.0 Pressure = 479kPa 10,000 lb/ft2 SKAPS Industries l www.skaps.com TN 220 GN PE 3.0 x 10-4 m2/sec 1 x 10-4 (0.05) TN 220 D/L 6,8 O/C PP/PE/PP Y (NW) 4.3/varies (14/varies) NP NP TN 270 D/L 6,8 O/C PP/PE/PP Y (NW) 4.3/varies (14/varies) NP NP 1 x 10-3 (0.48) 5 x 10-4 (0.24) TN 330 D/L 6,8 O/C PP/PE/PP Y (NW) 4.3/varies (14/varies) NP NP 2.5 x 10-3 (1.2) 1 x 10-3 Y 3.90 (12.8) 5.0 (197) NP 0.00244 (12.0) 0.00025 (12.0) TechFab India l www.techfabindia.com TDC55130 [1] [2] [3] [4] [5] Extruded GN = Geonet O/C = Other or combination HDPE = High Density polyethylene PE PP = Polypropylene PS NP = Not provided by manufacturer O/C If "Y", specify woven or nonwoven. Thickness includes attached geotextile, when applicable Seating time is 15 min. and flat-plate environment. PE = Polyethylene = Polystyrene = Other or combination NP = Data not provided by manufacturer NA = Not applicable, per manufacturer ◆ Specification Change- this specification (D1621) changed in the 2017 Specifier's Guide. From: Compressive Strength at yield ASTM D1621 kPa (psi) To: Compressive Strength at yield per ASTM D6364 units kPa (psi) « Geosynthetics recommends you contact the manufacturers before making any specifying/purchasing decisions » www.GeosyntheticsMagazine.com 101http://www.skaps.com http://www.techfabindia.com http://www.GeosyntheticsMagazine.com