Geosynthetics December 2019/January 2020 - 44

GEOTEXTILES
M288 Transportation-Related Applications

Wide Width Tensile/Elongation
ASTM D 4595 kN/m (lb/in)/%

Grab Tensile/Elongation
ASTM D 4632 kN (lb)/%

M288 Survivability Class

M288 Applications [4]

Creep Limited Strength-MD
ASTM D 5262 [6] kN/m (lb/ft)

LTDS GRI GT7-MD (in sand) [7]
kN/m (lb/ft)

Other Manufacturer's
Suggested Applications [8]

0.934
(210)

0.11 (25)

0.35 (80)/50

NP

NP

NA

NA

NA

NA

NA

NA

F, D, E

0.178 (40)

0.401
(90)/50

NP

NP

NA

NA

NA

NA

NA

NA

F, D, E

Puncture ASTM D 6241
kN (lb)

Trapezoid Tearing Strength
ASTM D 4533 kN (lb)

Physical Properties

2.2/6927 (170), CH

Permittivity
ASTM D 4491 sec-1
Flow Rate (FH or CH) [3]
l/min/m2 (gal/min/ft2)

Apparent Opening Size
ASTM D 4751 mm
(U.S. sieve)

Percent Open Area
CWO-22125 %

Mass Per Unit Area
ASTM D 5261 g/m2 (oz/yd2)

Product Name (Structure [1]/
Polymer Type [2])

Filtration/Hydraulic Properties

Reinforcement Applications

Strength @ 5%
Strain [5]

Ultimate
Strength %
(Tult) [5]

MD

XD

MD

XD

Dalco Nonwovens l www.dalcononwovens.com
Dalco 1031
(NW-P/PP)

NP

NP

0.30 (50)

Dalco 1035
(NW-P/PP)

NP

NP

0.30 (50)

2.1/6095 (165), CH

1.157
(260)

Dalco 1040
(NW-P/PP)

NP

NP

0.212 (70)

2.0/5700 (140), CH

1.379
(310)

0.202 (45)

0.45
(100)/50

NP

NP

NA

NA

NA

NA

NA

NA

F, D, E

Dalco 1045
(NW-P/PP)

NP

NP

0.212 (70)

1.8/4885 (120), CH

1.490
(335)

0.22 (50)

0.54
(120)/50

3

SP, D, F, E

NA

NA

NA

NA

NA

NA

F, D, E

Dalco 1060
(NW-P/PP)

NP

NP

0.212 (70)

1.4/4479 (110), CH

1.824
(410)

0.269 (60)

0.71
(160)/50

2

SP, D, F, E

NP

NP

NP

NP

NP

NP

P

Dalco 1070
(NW-P/PP)

NP

NP

0.212 (70)

1.4/4479 (110), CH

2.046
(460)

0.333 (75)

0.80
(180)/50

2

SP, D, F, E

NP

NP

NP

NP

NP

NP

P

Dalco 1080
(NW-P/PP)

NP

NP

0.18 (80)

1.3/4074 (100), CH

2.335
(525)

0.359 (80)

0.91
(205)/50

1

ST, SP, D,
F, E

NP

NP

NP

NP

NP

NP

P

Dalco 1100
(NW-P/PP)

NP

NP

0.18 (80)

1.2/3251 (80), CH

2.780
(625)

0.444 (100)

1.1 (250)/50

1

ST, SP, D,
F, E

NP

NP

NP

NP

NP

NP

P

Dalco 1120
(NW-P/PP)

NP

NP

0.15 (100)

0.9/3055 (75), CH

3.670
(825)

0.51 (115)

1.33
(300)/50

1

ST, SP, D,
F, E

NP

NP

NP

NP

NP

NP

P

0.7/2035 (50), CH

4.559
(1025)

0.644 (145)

1.69
(380)/50

1

ST, SP, D,
F, E

NP

NP

NP

NP

NP

NP

P

Dalco 1160
(NW-P/PP)

[1]	
	
	
[2]	
[3]	
	
[4]	
	
	
	
[5]	

NW	
W	
K	
PP	
FH	
CH	
SP	
ST	
F	
A/O	
MD	

NP

NP

0.15 (100)

= Non woven, -P = needlepunched, -h = calendered
= Woven, -SF = slit film	
t	
= thermally bonded
= Knitted	
O/C	 = Other/combination
= Polypropylene, PET = Polyester, * = average
= Test is run by the falling head method
= Test is run by the constant head method
= Separation	
S/F	 = Silt Fence
= Stabilization	
D 	 = Drainage
= Filtration	
E	
= Erosion Control
= Asphalt overlay
= Machine direction	
XD = Cross-machine direction

[6]	 For a minimum of 10,000 hours, extrapolated to
	 a 75 year time period
Tult
[7]	 LTDS =	
	
RFCR x RFID x RFD
	RFCR = Reduction factor for creep
	RFID = Reduction factor for installation damage
	RFD = Reduction factor for durability
NOTE: this equation does not include other reduction factors which may apply to
design. Reduction factors are site specific and should be reviewed on a per project
basis. Contact the manufacturer for recommendations.

[8]	 R	 = Reinforcement	
P	 = Protection
	 SP	 = Separation	
S/F	 = Silt Fence
	 ST	 = Stabilization	
D	 = Drainage
	 F	 = Filtration	
E	 = Erosion Control
	 RC	 = Reinforcement Composite
	 A/O	 = Asphalt overlay
NP	 = Not provided by manufacturer
NA	 = Not applicable, per manufacturer
Companies were requested to provide minimum average
roll values (MARV). All claims are the responsibility of
the manufacturer.

« Geosynthetics recommends you contact the manufacturers before making any specifying/purchasing decisions »

44

Geosynthetics | December 2019 January 2020
http://www.dalcononwovens.com
Geosynthetics December 2019/January 2020

Table of Contents for the Digital Edition of Geosynthetics December 2019/January 2020
