Geosynthetics December 2021/January 2022 - 83

GEOGRIDS
Dimensional Properties [2]
Aperture Size
mm (in)
Tensile Strength/[Elongation]
ASTM D 6637 [2] kN/m (lb/ft)/%
Strength @ 5% Strain
Ultimate Strength/%
(Tult)
ACE Geosynthetics Inc. l www.geoace.com
ACEGrid GG1000-I
woven
ACEGrid GG400-II
ACEGrid GG200-II FR
woven
woven
PET
PET
PET
PVC
PVC
Flameretardant
polymer
NP
NP
250
(17109)
120 (8215)
NP
30 (1.2)
AFITEX-Texel Geosynthetics Inc. l www.draintube.net
NOTEX PVA C 400-30
Warp-Knitting
NOTEX C 1000-30
NOTEX GLASS C
100-100/40 AN
Warp-Knitting
Warp-Knitting
PVA
PET
FG
Polymeric
Polymeric
Polymeric
Carthage Mills l www.gxgeogrids.com
GX-300
Woven
GX-500
GX-800
Woven
Woven
PET
PET
PET
PVC
PVC
PVC
374 (11)
1638 (48)
414 (12)
25 (1)
25 (1)
40 (1.6)
30 (1.2)
NP
NP
NP
NP
1000 (68440)
400 (27375)
200 (13687)
100 (6845)
400 (27375)
200 (13687)
709 (48522)
284 (19436)
NA
689 (47153)
275 (18820)
NA
W, S, E
W, S, E
W, S, E
(Flameretardant)
25
(1)
25 (1)
40 (1.6)
90 (6167)
NP
NA
10 (685)
10 (685)
NA
200 (13704)
/10
1000 (68522)
/10
100 (6852) /3
30 (2056)
/10
30 (2056)
/10
100 (6852)
/3
NP
NP
NP
NA
NP
NA
B, E, S, SI
B, E, S, SI
A/O, PR
NA
NA
NA
22
25
(0.87)
22
(0.87)
23
(0.91)
Geosynthetic Solutions l www.geosyntheticsolutions.com
3D-LT Triplanar Grid
Integrally formed
3D-T Triplanar Grid
3D-HT Triplanar Grid
3D-XL Triplanar Grid
MG 270 Mining Grid
Integrally formed
Integrally formed
Integrally formed
Integrally formed
PP
PP
PP
PP
PP
N/A
N/A
N/A
N/A
Flameretardant
polymer
N/A
N/A
N/A
N/A
N/A
33
(1.30)
32 (1.26)
32 (1.26)
60 (2.40)
58 (2.30)
(0.98)
25
(0.98)
23
(0.91)
15.7
(1,080)
17.4
(1,202)
29.5
(2,023)
N.A.
N.A.
N.A.
47.3
(3,250)
65.5
(4,500)
106.6
(7,315)
NA
NA
NA
32.2
(2,211)
44.6
(3,061)
72.5
(4,976)
27.4
(1,879)
37.9
(2,601)
61.6
(4,228)
E, S, SI, W
E, S, SI, W
E, S, SI, W
33 (1.30)
32 (1.26)
32 (1.26)
60 (2.40)
60 (2.40)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
21.9 (1,500)
N/A
N/A
N/A
N/A
21.9 (1,500)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
SI, B
SI, B
SI, B
SI, B
SI, B, W, E, S
[1] PET = Polyester,
HDPE = High density polyethylene
[4] LTDS =
PVC = Polyvinyl chloride
EP = Elastomeric Polymer
PVA = Polyvinyl alcohol
FG = Fiberglass
PP = Polypropylene
[2] MD = Machine direction
XD = Cross-machine direction
[3] Test per ASTM D 5262, for a minimum of 10,000 hours
and extrapolate to a 75-year time period.
Tult
RFCR x RFID x RFD
RFCR = Reduction factor for creep
RFID = Reduction factor for installation damage
RFD = Reduction factor for durability
NOTE: this equation does not include other reduction factors
that may apply to design. Reduction factors are site specific
and should be reviewed on a per project basis. Contact the
manufacturer for recommendations.
« Geosynthetics recommends you contact the manufacturers before making any specifying/purchasing decisions »
www.GeosyntheticsMagazine.com
83
[5] A/O = Asphalt overlay
B = Base reinforcement
E = Embankments
PR = Pavement reinforcement
S
= Slopes
SI = Subgrade improvement
W = Walls
NP = Not provided by manufacturer
NA = Not applicable, per manufacturer
* = Not for sale in U.S.
Companies were
requested to provide
minimum average
roll values (MARV).
All claims are the
responsibility of the
manufacturer.
Product Name
Manufacturing Process
Polymer Type [1]
Coating Type [1]
Mass/Unit Area
ASTM D 5261 g/m2
(oz/yd2)
MD
XD
MD
XD
MD
XD
Creep Limited
Strength-MD [3]
ASTM D 5262 kN/m (lb/ft)
LTDS GRI GG4-MD [4]
kN/m (lb/ft) (in sand)
Manufacturer's
Suggested
Applications [5]
http://www.geoace.com http://www.draintube.net http://www.gxgeogrids.com http://www.geosyntheticsolutions.com http://www.GeosyntheticsMagazine.com
Geosynthetics December 2021/January 2022

Table of Contents for the Digital Edition of Geosynthetics December 2021/January 2022
