Geosynthetics December 2021/January 2022 - 85

GEOGRIDS
Dimensional Properties [2]
Aperture Size
mm (in)
Tensile Strength/[Elongation]
ASTM D 6637 [2] kN/m (lb/ft)/%
Strength @ 5% Strain
Ultimate Strength/%
(Tult)
Industrial Fabrics Inc. l www.ind-fab.com
Integrally Formed
BaseLok GeoGrid
BX1100
BaseLok GeoGrid
BX1200
BaseLok GeoGrid
BX2020
BaseLok GeoGrid
BX3030
BaseLok GeoGrid
BX3030L
BaseLok FabGrid
FG1100
BaseLok FabGrid
FG1200
BaseLok FabGrid
FG2020
BaseLok FabGrid
FG3030
BaseLok FabGrid
FG3030L
Integrally Formed
Integrally Formed
Integrally Formed
Integrally Formed
Integrally Formed
and Bonded
Integrally Formed
and Bonded
Integrally Formed
and Bonded
Integrally Formed
and Bonded
Integrally Formed
and Bonded
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
L & M Supply l www.landmsupplyco.com
BX Grid 11 Type 1A
Integrally formed
biaxial
BX Grid 12 Type 2A
BX1500
SQ2020
SQ3030
Integrally formed
biaxial
Integrally formed
biaxial
Integrally formed
biaxial
Integrally formed
biaxial
PP
PP
PP
PP
PP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
25 (1)
25 (1)
33 (1.3)
33 (1.3)
57 (2.2)
25 (1)
25 (1)
33 (1.3)
33 (1.3)
57 (2.2)
33 (1.3)
33 (1.3)
33 (1.3)
33 (1.3)
57 (2.2)
33 (1.3)
33 (1.3)
33 (1.3)
33 (1.3)
57 (2.2)
8.5 (580)
11.8 (810)
13 (890)
21 (1440)
21 (1440)
8.5 (580)
11.8 (810)
13 (890)
21 (1440)
21 (1440)
13.4 (920)
19.6 (1340)
13 (890)
21 (1440)
21 (1440)
13.4 (920)
19.6 (1340)
13 (890)
21 (1440)
21 (1440)
12.4 (850)
19.2 (1310)
20 (1370)
30 (2055)
30 (2055)
12.4 (850)
19.2 (1310)
20 (1370)
30 (2055)
30 (2055)
19 (1300)
28.8 (1970)
20 (1370)
30 (2055)
30 (2055)
19 (1300)
28.8 (1970)
20 (1370)
30 (2055)
30 (2055)
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
SI, B
SI, B
SI, B
SI, B
SI, B
SI, B
SI, B
SI, B
SI, B
SI, B
26 (1.0)
26 (1.0)
25 (1.0)
38 (1.5)
38 (1.5)
33 (1.3)
33 (1.3)
31 (1.2)
38 (1.5)
38 (1.5)
8.5 (580)
11.8 (810)
17.5 (1,200)
13 (890)
21 (1,440)
13.4 (920)
19.6 (1,340)
20.0 (1,370)
13 (890)
21 (1,440)
12.4 (850)
19.2 (1,310)
27 (1,850)
20 (1,370)
30 (2,055)
19.0 (1,300)
28.8 (1,970)
20 (1,370)
20 (1,370)
30 (2,055)
[1] PET = Polyester,
HDPE = High density polyethylene
[4] LTDS =
PVC = Polyvinyl chloride
EP = Elastomeric Polymer
PVA = Polyvinyl alcohol
FG = Fiberglass
PP = Polypropylene
[2] MD = Machine direction
XD = Cross-machine direction
[3] Test per ASTM D 5262, for a minimum of 10,000 hours
and extrapolate to a 75-year time period.
Tult
RFCR x RFID x RFD
RFCR = Reduction factor for creep
RFID = Reduction factor for installation damage
RFD = Reduction factor for durability
NOTE: this equation does not include other reduction factors
that may apply to design. Reduction factors are site specific
and should be reviewed on a per project basis. Contact the
manufacturer for recommendations.
« Geosynthetics recommends you contact the manufacturers before making any specifying/purchasing decisions »
www.GeosyntheticsMagazine.com
85
[5] A/O = Asphalt overlay
B = Base reinforcement
E = Embankments
PR = Pavement reinforcement
S
= Slopes
SI = Subgrade improvement
W = Walls
NP = Not provided by manufacturer
NA = Not applicable, per manufacturer
* = Not for sale in U.S.
Companies were
requested to provide
minimum average
roll values (MARV).
All claims are the
responsibility of the
manufacturer.
Product Name
Manufacturing Process
Polymer Type [1]
Coating Type [1]
Mass/Unit Area
ASTM D 5261 g/m2
(oz/yd2)
MD
XD
MD
XD
MD
XD
Creep Limited
Strength-MD [3]
ASTM D 5262 kN/m (lb/ft)
LTDS GRI GG4-MD [4]
kN/m (lb/ft) (in sand)
Manufacturer's
Suggested
Applications [5]
http://www.ind-fab.com http://www.landmsupplyco.com http://www.GeosyntheticsMagazine.com
Geosynthetics December 2021/January 2022

Table of Contents for the Digital Edition of Geosynthetics December 2021/January 2022
