Geosynthetics February/March 2022 - 35

Seaman Corp.
XR-FR
XR-FR is a
geomembrane
material for use
in secondary
containment
applications in the
oil and gas industry
where flammable
and combustible
tank containment
is required. The XR Geomembrane product
line offers much higher tensile strength and
puncture resistance when compared to other
geomembranes. XR also offers outstanding
weathering resistance and industry-leading
chemical-resistance properties, and it is ideal for
use in exposed applications. XR-FR meets ULC
S668 and NFPA 701 guidelines.
www.XRGeomembranes.com
Solmax
LEAK LOCATION SUITE
Geomembranes
play a critical role in
waste containment
and in preventing
contaminants in
landfills, basins,
ponds, tanks
and waste pads
from polluting
the air, soil and
water; but even the best liners can puncture.
Solmax's Leak Location Suite brings reliability
and speed to electrical leak location surveys.
The suite comprises the Solmax Leak Location
Conductive liner; an installation technique
enabled by Solmax's patented Iso-wedge tool;
and the company's S-100 Spark Tester, which
tests even the most challenging surfaces.
LITEEARTH
Solmax's anchored
LiteEarth capping
system enables
capping of basins
where erosion
and soil instability
make it difficult to
install and operate
traditional capping
systems. While
traditional systems
require significant design considerations and
maintenance to avoid erosion of the cover,
the LiteEarth capping system is a monolithic
geosynthetic system with no granular ballast
to maintain. LiteEarth is made of a 40-mil
(1-mm) linear low-density polyethylene
(LLDPE) series geomembrane laminated to
synthetic turf and is installed using permanent
engineered earth anchors.
www.solmax.com
TechFab India Industries Ltd.
TECHGEOMATTRESS
TechGeoMattresses
are sand-filled
tubular mattresses
that are used
in riverbank
protection,
coastline erosion
protection,
flood mitigation,
and canals and
other waterways. Stable under wave action,
TechGeoMattresses dissipate pore pressure with
no erosion and promote vegetation growth.
With speedy installation, TechGeoMattresses
offer savings in installation and transportation
compared to aggregate.
www.techfabindia.com
TenCate Geosynthetics
MIRAFI MPG4
Mirafi MPG4 is
a glass filament
reinforced paving
composite that
is manufactured
by mechanically
bonding glass
fiber bundles
to a nonwoven
paving fabric. This
composite paving
grid combines the key reinforcing properties of
glass filaments with the liquid asphalt retention
capacity of a nonwoven paving fabric for
optimum pavement performance. Mirafi MPG4
offers significant benefit to pavement overlays
through crack reflection management, moisture
barrier, high adhesive bonding, asphalt
recycling and chemical resistance to road salt
and other chemical deicing agents.
MIRAFI H2RI
Mirafi H2Ri is a
proven continuous
moisture
management
system for more
sustainable and
economical
pavements. Mirafi
H2Ri is a highly
engineered
geosynthetic that incorporates a waterwicking
component in addition to stabilization
to provide the ultimate integrated
geosynthetic. Manufactured from woven,
high-tenacity polypropylene filaments
and patented wicking filaments to provide
the combined functions of reinforcement,
confinement, separation and filtration, Mirafi
H2Ri also provides continuous moisture
management of soil/aggregate materials in
saturated and unsaturated conditions.
www.GeosyntheticsMagazine.com
35
http://www.XRGeomembranes.com http://www.solmax.com http://www.techfabindia.com http://www.GeosyntheticsMagazine.com
Geosynthetics February/March 2022

Table of Contents for the Digital Edition of Geosynthetics February/March 2022
