CUSHION CONSTRUCTION "HOW-TO" Lay out the patterns for the cushion faces and side bands along the width of 54-inch Navy Sunbrella®. This layout provides the least shrinkage when the band seams are sewn to the top panels and topstitched. Make sure notches on all four sides are marked prior to cutting the panels as well as identification for inside (I/S) and outside faces (O/S). Use each pattern again for the layout of the mesh weave for your cushion bottoms. Again, check that notches on all sides are marked for alignment and identification to the tops and bands. Prior to joining the mesh bottom to the sideband, prepare the We used three colors of ripstop nylon with an individual tag sewn outside along each center zipper for easy identification. "Red" for the port #1 and port #2 seat and back; "blue" for the center seat and back; and "green" for the starboard #1 and starboard #2 seat and back. mesh with a center zipper and sew the 2-inch female Velcro® tape along the seat cushion edge. Now you are ready to sew the mesh base to the cushion top. Follow with topstitching along both sides of the band. This also enables inside seams to lie flat when foam is inserted. Discover. Learn. CONNECT. Join us at the annual Marine Fabricators Conference on the sunny shores of Daytona Beach, FL from Jan. 9-11, 2020. * Three full days of education and networking * Discover the latest products and innovations * Learn new strategies with hands-on and classroom presentations * Connect with fabricators and suppliers at multiple networking events Visit IFAI.com/MarineConference to learn more. 2020 Tools, Tips and Tricks Participate in the annual Tools, Tip and Tricks session. Learn more about how you can enter at IFAI.com/MarineConference Interested in exhibiting/sponsoring? Contact Barbara Connett at 651 225 6914 or bjconnett@ifai.com. www.marinefabricatormag.com | 45http://www.IFAI.com/MarineConference http://www.IFAI.com/MarineConference http://www.marinefabricatormag.com