ShopTalk Exterior Cockpit cover installation Installation is the time to put the final touches on the cover to ensure everything fits well and the final product is what you set out to achieve. Begin by sliding the keder welt into the track under the bridge deck to secure the top of the cover. Once that is in place, stretch the cover to the rear rub rail and install the pins in the pre-determined holes to secure the cover. As a general tip, we tell customers to start putting pins in around the middle of the rub rail and work out to the corners. When that is complete, the cover is finished, and the job is done. 5 PHOTO 5: Here is the cover stretched to the rear rub rail with pins installed in predetermined holes. A zipper allows the user to secure the cover to poles inserted into rod holders rather than the rub rail, if desired. Stay Connected to your industry MarineFabricatorMag.com features everything the magazine has and more: Exclusive feature content Industry news updated daily In-depth research on the latest products and projects MarineFabricatorMag.com 32 Marine Fabricator | July/Aug 2020http://www.MarineFabricatorMag.com http://www.MarineFabricatorMag.com