Canadian Finishing and Coatings Manufacturing: Nov/Dec 2022 - 21

INDUSTRIAL FINISHING: AEROSOL DEPOSITION
Bex Engineering Limited 8 10
Buhler Inc. 2 3 4 5 6 7 8 9 10 11 12
Chicago Boiler/CB Mills 9
Chisholm Machinery Solutions 9
Classifier Milling Systems 1 2 3 4 5 6 7 8 9 10 11 12
Custom Milling & Consulting, Inc. 9
Filtration & Separation Technologies 9
Innovative Finishing Solutions Inc. 8
Netzsch Premier Technologies LLC 2 9 10
Powder Parts, Inc. 1
Promix Mixing Equipment & Engg. Ltd. 10
Union Process 9
shims
Pressure Vessels
Complete Spray Paint Equipment
Filtration & Separation Technologies
Innovative Finishing Solutions Inc.
International Surface Preparation Canada
Norstone, Inc.
are
deposition coatings increases with
regard to volume and materials.
Another potential application for
ceramic coatings is their use in friction
shims. Friction
needed
in applications with high torque
transmittance if miniaturisation is the
goal or if more massive components may
not be used. Typical market segments
are powertrains, wind turbines, robotics,
aviation, and aerospace all of which
sport impressive growth rates. Friction
shims are currently coated with nickelphosphorus
in which diamonds are
embedded. This increases the friction
of the shims and thus creates a stronger
connection between two components.
The size and number of diamonds
are matched with the surface of the
components to be joined.
Coatastic ceramic coatings offer
SensaDyne Instrument Division
Steelcraft Engineered Products
TANK PROvider
Thermon
Titan Metal Fabricators - Metal Finishing Products Division
Process Pigging
Innovative Finishing Solutions Inc.
Scrubbers
1 Air
2 Gas
an
Tri-Mer Corp 1 2
Sieves
Buhler Inc.
alternative
to the conventional
process. The required roughness and
strength are achieved by structuring
the surface of the metal shim itself and
then covering it with Heraeus Coatastic
coating. According to current results,
this combination enables at
Dormer Finishing Systems Ltd.
Folio Instruments Inc.
GENEQ inc.
Norstone, Inc.
Powder Coating Supply Inc.
Stone Tucker Instruments Inc.
TANK PROvider
Filtration & Separation Technologies 1 2
Folio Instruments Inc. 1
GFL Environmental East Corp 1 2
Gizmo Products Inc. 1
Howard Marten Fluid Technologies Inc. 1 2
Innovative Finishing Solutions Inc. 1 2
Lonza 1
Myers Engineering, Inc. 1
Netzsch Premier Technologies LLC 1
Quickblades, Inc. 1
Radia 1
RB Atlas 1 2
SensaDyne Instrument Division 1
Ship & Shore Environmental 1 2
Siemens Process Industries and Drives 1 2
Skyray XRF 1
The CMM Group, LLC 1 2
Union Process 1
UV Canada 1 2
UV Process Supply, Inc. 1
Woodman Agitator, Inc. 1
Static Eliminators
Bex Engineering Limited
Bystat International Inc.
Complete Spray Paint Equipment
Innovative Finishing Solutions Inc.
Tech Sales Co.
UV Process Supply, Inc.
least a
six-fold increase in frictional force
compared with the untreated surface.
Coefficients of friction of up to 4.5µ
have been measured. Compared to the
conventional approach, the expensive
raw material diamond can be omitted,
while at the same time eliminating
the need for nickel-phosphorus,
which can be harmful to health. This
is particularly relevant because of the
steadily increasing requirements for
occupational safety in manufacturing
processes due to legal regulations.
The Coatastic coating also increases
Sifters and Screeners
1 Air Classifiers
2 Centrifugal Sifters
3 Lab
4 Ultrasonic
5 Vibratory Screeners
Buhler Inc. 1 3 5
Chicago Boiler/CB Mills 3
Chisholm Machinery Solutions 3
Classifier Milling Systems 1 2 3 4 5
Custom Milling & Consulting, Inc. 3
Filtration & Separation Technologies 3
International Surface Preparation Canada 5
Netzsch Premier Technologies LLC 3
Union Process 3
Solvent Recovery
1 Equipment
2 Services
the operating temperature by a factor
of two. Previous coatings can only be
used up to 400 deg C and are electrically
conductive, which limits their range of
application. With ceramic coatings, they
can be used up to the temperature limit
of the shim, usually 700 deg C, while
having an electrically insulating effect.
Apart from shims the Coatastic frictionenhancing
films can be applied to other
parts such as bolts or screws as well.
Their frictional connection can also
benefit from this technology.
AMETEK Brookfield 1
Aqua Bond Inc. 1
AvoFix NDT Ltd. 1
Bex Engineering Limited 1
Buhler Inc. 1
Bystat International Inc. 1
Can-Am Instruments Ltd. 1
Chameleon Innovations 1
Chicago Boiler/CB Mills 1
Chisholm Machinery Solutions 1
Classifier Milling Systems 1 2
Complete Spray Paint Equipment 1
Compressed Gas Technologies Inc. 1
Corrotec Inc. 1
Custom Thermal Applications 1 2
Dimachem Inc. Chemfil 1
Disti by Daetwyler 1
Exergy Systems, Inc. 1
Fielding Environmental 1 2
Bastian Ebeling is the marketing
manager for Heraeus Business Solutions
GmbH. For more information, visit
www.heraeus-high-performancecoatings.com
WWW.CFCM.CA
CANADIAN
FINISHING & COATINGS MANUFACTURING
November/December 2022
21
63
Paint & Coatings Manufacturing Equipment and Services
https://www.connblade.com/ https://www.heraeus.com/en/landingspages/hpc/home_hpc/high_performance_coatings.html http://WWW.CFCM.CA
Canadian Finishing and Coatings Manufacturing: Nov/Dec 2022

Table of Contents for the Digital Edition of Canadian Finishing and Coatings Manufacturing: Nov/Dec 2022
