Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 42
NEW PRODUCTS
VENT-E BREATHABLE EPOXY FLOOR
Dur-A-Flex Inc. has launched a new breathable epoxy
system for floors with elevated moisture and salt
content. The Vent-E formulation is designed to provide
additional protection to concrete floors.
Epoxy floors are a long-standing choice for any
environment requiring durable and seamless floors. As
durable as epoxy flooring is, the combination of moisture
and salts found in the substrate can be problematic.
Epoxy flooring systems are impermeable, meaning
they trap the moisture and salt below the surface. If the
moisture and salt content is too high, the combination
can cause blisters and adhesion failures.
The flooring industry typically combats issues like this
by using moisture mitigating primers before installing
an epoxy floor. If the moisture and salt levels exceed that
option, using a cementitious urethane-based flooring
system would be the next choice. In some cases, these
solutions are excessive for the needs, timeline and/or
budget of the project.
Vent-E bridges the gap between protective and
seamless coatings and other resinous flooring systems.
The permeability of Vent-E permits moisture to move
through the slab and coating without causing unsightly
blemishes or failures. Vent-E offers many of the same
features of other protective epoxy flooring systems:
stain and wear resistance, dust prevention and easy
maintenance.
The breathable epoxy system is available in nine
colours with a semi-gloss finish, installs quickly and
easily, and is cured for foot traffic in as little as four to
six hours. Vent-E is an ideal solution for commercial
buildings, storage areas, warehouse floors, production
areas, and more.
www.dur-a-flex.com
DEFELSKO LAUNCHES OVEN
TEMPERATURE LOGGER
The PosiTest OTL oven temperature logger
is designed to measure oven temperature
profiles, measuring and recording up
to 40,000 datasets in up to six batches.
With an easy-to-use interface, the OTL
records measurements ever two seconds
for up to 22 hours. Users can download,
view and analyse batch data using the
PosiSoft desktop software [included with
the OTL) and export the data to create
spreadsheets.
The OTL logger is housed in a high
temperature stainless steel barrier box,
and comes with a choice of holder and
six engraved probe ID tags. There is also
a wide variety of air and surface probes
available.
www.defelsko.com
42
www.cfcm.ca
http://www.dur-a-flex.com
http://www.defelsko.com
http://www.cfcm.ca
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023
Table of Contents for the Digital Edition of Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 1
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 2
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 3
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 4
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 5
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 6
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 7
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 8
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 9
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 10
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 11
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 12
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 13
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 14
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 15
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 16
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 17
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 18
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 19
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 20
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 21
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 22
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 23
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 24
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 25
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 26
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 27
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 28
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 29
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 30
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 31
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 32
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 33
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 34
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 35
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 36
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 37
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 38
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 39
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 40
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 41
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 42
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 43
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 44
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 45
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 46
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 47
Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 48
https://www.nxtbookmedia.com