Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023 - 45

NEW PRODUCTS
NEW AEROSPACE
SEALANT KIT
PPG recently announced
the launch of its SEMCO
sealant removal, mixing
and application kit, a
portable, wheeled tool kit
for the application and
removal of aerospace
sealants, adhesives and
potting compounds on
aircraft at any remote
site.
The kit consists of
TEMPORARY FLANGE COATINGS SAVE
TIME
Piping is everywhere in process industries, especial
in chemical and petroleum production. And the flange
faces on the end of almost every pipe segment are
a critical connection for pressure containment. Any
deterioration of these surfaces could weaken the
integrity of that connection, which also creates safety
and performance concerns.
Cortec recommends two removable coatings that
are easy to install and decreases potential downtime
by protecting the flange face areas from corrosion.
VpCI-391 is a water-based temporary coating
with low VOC. When applied it leaves a clear nontacky
film that is almost unnoticeable and can be
easily removed with alkaline cleaners. VpCI-391 also
provides protection in harsh, outdoor, unsheltered
environments and has adequate UV resistance.
For more extreme conditions, Cortec offers VpCi368,
a fast-drying solvent-based coating that leaves a
waxy finish.
Eric Uutala, technical sales and product manager
for Cortec, explains the alternative, : " If a raised face is
damaged, either from corrosion or mechanical impact,
it can cause significant delays in construction in startup
activities. In the case of gramophone raised faces,
the re-surfacing process can be very time consuming
and could lead to further downtime. "
By using a removable coating, the protective
mechanism conforms directly to the surface of the
metal, not requiring an additional covering system
such as plastic film.
When applying these removable coatings, Uutala
says to make sure the flange face is clean and free of
rust, dirt, coatings, and any other contaminants. Apply
the VpCI-368 or -391 with a brush and allow it to dry
for one to two hours before covering with rigid flange
cover or other approved mechanical protection.
www.corteccoatings.com
Simply Applying Most Efficient Solutions
a lightweight batterypowered
dispensing gun and mixer, along with a spare,
rechargeable battery and charging accessories housed
in a watertight, crushproof and dustproof case. Users
can quickly and easily remove old sealant and apply
fresh product without requiring the aircraft to be moved
to a hangar.
" This kit provides people working in difficult
environments with a simple solution for sealant
removal and application, " said AbdulHalim Sayyed, PPG
global marketing manager, packaging, Aerospace.
www.ppgaerospace.com
BECOME
SAMES.COM | 800.573.5554
MARKETING.US@SAMES.COM
SCAN FOR MORE
INFO ABOUT
OUR PRODUCTS
AND SERVICES
May/June 2023
45

http://www.ppgaerospace.com http://www.SAMES.COM http://www.corteccoatings.com

Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023

Table of Contents for the Digital Edition of Canadian Finishing & Coatings Manufacturing Magazine - May/June 2023