PASS & SEYMOUR / STRAIGHT BLADE RECEPTACLES COMMERCIAL GRADE RECEPTACLES Commercial Specification Grade Weather-Resistant Tamper-Resistant Receptacles 20A, 125V 1.104 " 2.635 " 3.281 " .780 " WR20TRW 1.322 " Features * Auto-ground clip assures positive ground. * WR marking on face as required by UL Standard. * Zinc-plated steel mounting screws for greater ease of installation and removal in wet or damp locations. * Strap tabs wrap around face to prevent strap from separating from face and back body. * Tri-drive brass terminal screws. Internal screw-pressure-plate back and side wire capability. Two back wire holes for more wiring flexibility. * Heavy-duty, brass strap for added strength and ground conductivity. * UV-resistant nylon face for longer life under adverse environmental conditions. * Two drive screws anchor strap to back body and face where abrupt removal torque is strongest. * Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring. * .032 inch thick brass triple-wipe power contacts for lasting retention. RATING CATALOG NUMBER A. WR20TRGRY WR20TRLA National Electrical CodeĀ® 20 20 20 20 20 V. 125 125 125 125 125 COLOR Ivory Gray Light Almond WR20TR models are Tamper-Resistant. Section 406.8 Receptacles in Wet or Damp Locations. Requires that all 15- and 20-amp, 125- and 250-volt non-locking receptacles installed in wet or damp locations shall be weather-resistant receptacles. White Brown NEMA CONFIG. NO. WEATHER-RESISTANT TAMPER-RESISTANT DUPLEX RECEPTACLES SIDE WIRE WR20TRI WR20TRW WR20TR 5-20R 5-20R 5-20R 5-20R 5-20R 3rd PARTY COMPLIANCE UL498 2 Pole, 3 Wire * * * * * NEMA 5-20R For Bulk Packaging Solutions consult factory. WWW.LEGRAND.US/PASSANDSEYMOUR 83 STRAIGHT BLADE RECEPTACLES INDEXhttp://WWW.LEGRAND.US/PASSANDSEYMOUR