WIREMOLD / OPEN SPACE RC9AFFTC SERIES™ POKE-THRU DEVICES RC9AFFTC Series Poke-Thru Devices Ordering Information RC9FFS Insert Stem with Disposable Plate Furniture feed insert with one 1 1/4 " and one 1/2 " trade size conduit to feed power and communication services. Use with RC9CFFTC Series Covers to form a complete poke-thru assembly. 1/2 " Trade Size Conduit Stem 1 1/4 " Trade Size Conduit Stem FFD-P Drop-In Hub 3/4 " trade size threaded drop-in hub. Used to make conduit connections to the service head. Assembled Furniture Feed Poke-Thru Device PART NUMBERS: RC9AFFTCGY (Gray) RC9AFFTCBK (Black) TG-1 Communication Grommet 14 7/16 " (367mm) 1/2 " Trade Size Conduit Stem 1 1/4 " Trade Size Conduit Stem Complete with hexagonal service head. Service head has one 3/4 " trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4 " and one 1/2 " trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Finish Flange & Service Head Assembly PART NUMBERS: RC9CFFTCGY (Gray) RC9CFFTCBK (Black) 7 " (178mm) Complete with gray or black carpet flange, gray hexagonal housing, five black rubber grommets and one 3/4 " trade size threaded dropin hub. The service head includes scrub water gasket. Use with RC9FFS Insert to form a complete poke-thru assembly. Drop-in rubber grommet for passthrough cabling. Set of two grommets (one grommet shown) black. Abandonment Plate PART NUMBERS: RCAPFFTCBK (Black) 7 " (178mm) Used to abandon fitting by removing hexagonal housing and placing plate inside the flange. Insert stem must remain in the place. ABPLUG3 Abandonment Plug Assembly 7 " (178mm) 3 3/16 " (97mm) Complete plug assembly for abandoning an open 3 " (76mm) diameter hole. Assembly includes intumescent fire-stop material to maintain the fire-classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor and a black die-cast aluminum cover. NOTE: RC9AFFTC Series poke-thru devices require a 3 " (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 " minimum. WWW.LEGRAND.US/WIREMOLD 265 POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD