14.4 INSTALLATION OF FDT 7.0 / FDT 4.5 GRIPWALK REMARK: The binding models FDT 7.0 & FDT 4.5 & VMotion Junior GRIPWALK are designed for the following boot soles: * Alpine ski boots for adults ISO 5355 type A * Junior ski boots ISO 5355 type C * Junior ski boots with the additional marking " GRIPWALK Junior " * Touring ski boots for adults ISO 9523 with the additional marking " Gripwalk® " IMPORTANT ! FDT 7.0 and FDT 4.5 bindings are designed to mount only in conjunction with the FDT Junior large or FDT Junior small plate systems ! 14.4 - 1 FDT Junior large FDT Junior small 14.4 - 2 IMPORTANT ! VMOTION Junior and VMOTION Junior R bindings are designed to mount only in conjunction with VMOTION Junior skis with premounted plates ! REMARK: Ski length / sole length Völkl VMotion Junior: Ski VMotion Junior 80 - 110 cm: sole length " S " 190 - 285 mm Ski VMotion Junior 120 - 160 cm: sole length " L " 235 - 330 mm FDT JUNIOR: DRILLING THE ATTACHMENT HOLES: * Place the FDT Junior installation tool W003H1T (14.4 - 1) onto the ski and align the mid - sole mark »FDT Junior small« or »FDT Junior large« with the mid - sole mark on the ski. max. 3 Nm 14.4 - 3 * Check if the installation tool is positioned correctly on the ski. * »FDT Junior small«: Drill 4 holes for the front plate and 4 holes for the heel plate through the yellow marked drill bushings. * »FDT Junior large«: Drill 4 holes for the front plate and 4 holes for the heel plate through the violet marked drill bushings. * Remove installation tool from the ski. REMARK: See DRILLING INSTRUCTIONS 3.2 INSTALLATION OF THE FDT JUNIOR PLATE: * Place the toe plate onto the ski, the length scale points to the ski tail. 14.4 - 4 * Place the heel plate onto the ski, the metal bracket points to the ski tail. * Tighten the screws by hand with a max. torque of 3 Nm. (14.4 - 2) INSTALLING THE TOE: * Open the locking lever and slide the toe from the center of the plate forward. (14.4 - 3 & 14.4 - 4) 14.4 - 5 CAUTION ! Make sure that the toe spacer rails engage both sides of the base plate properly. * Slide the toe to the correct sole length in accordance with the front sole length scale. (14.4 - 5) * Close the toe locking lever. (14.4 - 5) 99 14.4 MARKER RENTAL & DEMO MODELS