Marker Technical Manual 2021/2022 - 110

15.3 RECORD KEEPING
13.
Notes on any non-recommended release value adjustment. If the skier has
requested a release setting other than the one recommended by MARKER,
this must be noted on the workshop form. Also, an additional signed and dated
release must be attached to the completed workshop form.
 18.7
SPECIAL WARNING & AGREEMENT RELEASE WAIVER
14.
Refusal to serve statement: A statement should be included whenever the
technician identifies a ski / binding / boot system component that is out of
standard or otherwise unsuitable for continued use. Such a statement should
also be included whenever the customer refuses to have work performed
that the shop has advised will help reduce the risk of injury. In addition to
the required information, the shop may find it useful to include on the form
the skier's home phone number, local accommodations or other information
that would help the shop contact the skier in the case of a problem with the
system. The information required here by MARKER represents only the
minimum necessary for a proper legal defense. Additional information may be
included at the retailer's discretion.
The Skier's Signature is his or her acknowledgement that he or she:
*
*
*
*
*
*
Has been instructed in the proper use of the equipment.
Has received MARKER's in-box instructions (new bindings only).
Has verified that the visual indicator settings on the bindings correspond
to the visual indicator settings recorded on the workshop form.
Understands that there are inherent and other risks in the sport of skiing.
Understands that included in the release agreement is the warning that the
binding will not release or retain under all circumstances, nor is it possible to
predict every situation in which it will release or retain and it is, therefore,
no guarantee of his or her safety.
The person who signs the form must be the intended user of the equipment. In the
case of a minor skier, the signature of the skier's parent, legal guardian or agent
is also required. Whenever possible, the minor skier should also sign the form. If the
person picking up the equipment is not the skier or the skier's parent, legal guardian
or agent, treat this person as though he or she were the skier and obtain his or her
signature on the form next to the skier's signature.
IMPORTANT!
The MARKER Certified Technician's signature signifies that
the ski / binding / boot system has been inspected in accordance
with MARKER's required procedures. The MARKER Certified
Technician who signs the form is also attesting that the skier
has been properly instructed. The MARKER Certified Technician
may sign the form after inspecting the equipment, but before the
skier receives the recommended instruction and warning, as long
as it is part of the shop's written policy to always provide such
instruction to the skier when the equipment is delivered. The
skier's signature on the form is the shop's assurance that such
instructions were provided and understood.
IMPORTANT!
Without a properly completed workshop form, liability indemnification
from MARKER will be denied.
Has read and understood the release agreement on the workshop form, which
releases the shop and MARKER from liability.
108
15.3 RECORD KEEPING
Marker Technical Manual 2021/2022

Table of Contents for the Digital Edition of Marker Technical Manual 2021/2022
