15.8 INFORMATION FOR THE SKIER - BARON EPF & TOUR EPF ADDITIONAL INFORMATION FOR THE MARKER DUKE EPF & BARON EPF & TOUR EPF: ADAPTER FOR CRAMPONS: For fitting the crampon to the plate of the DUKE EPF & BARON EPF & TOUR EPF the accompanying crampon adapter must be mounted on the crampons. 15.8 - 1 (Exception: crampon 128mm H004M1A & 113 mm H002N1A with premounted adapter) * Remove the screws (15.8 - 1) 15.8 - 2 B 15.8 - 3 A * Push the clamp down and towards the front, away from the crampon. (15.8 - 2 and 15.8 - 3) 15.8 - 4 15.8 - 5 * Fit the adapter (15.8 - 4) from the front / bottom to the crampon as shown. (15.8 - 5 and 15.8 - 6) 15.8 - 6 15.8 - 7 B A 15.8 - 8 15.8 - 9 * Fit the screws and tighten them by hand. (15.8 - 9) * Push the crampon adapter upwards and towards the back until it clicks into place. (15.8 - 7 and 15.8 - 8) 114 15.8 INFORMATION FOR THE SKIER - DUKE PRO EPF / BARON EPF / F 12 TOUR EPF