16.1 MARKER KINGPIN BINDING COMPONENTS 8 7 11 9 16 3 14 13 15 1 12 6 2 4 MARKER KINGPIN & KINGPIN DEMO BINDING COMPONENTS: 1 - 2 - 3 - 4 - 7 - 8 - 9 - 10 - 11 - Opening lever toe Soleholder toe Toe retaining pins Step-in aids toe 5 - Crampon holder 6 - Change-over lever for ascent mode Opening lever heel Indicator scale heel vertical release Indicator scale twist release Heel housing Hiking aids 1 and 2 12 - Brake pedal 13 - Brake arm 14 - XXL-Power transmitter 15 - Demo length adjustment lever 16 - Demo front plate with length scale CAUTION ! MARKER KINGPIN, KINGPIN MWERKS & KINGPIN DEMO ski bindings do not meet ISO Certification. CAUTION ! MARKER KINGPIN, KINGPIN MWERKS and KINGPIN DEMO ski bindings are compatible with ski boots in accordance with ISO 9523 with tech inserts to the Dynafit specification of 29.09.2009. In addition, some boot manufacturers have developed and manufactured their own inserts for their touring ski boots which should be suitable for Pin bindings. However, Marker cannot guarantee that these inserts will function correctly. Boots that do not support the settings described in this Marker technical manual (chapter 12.1 - 12.3) should not be used with Marker Pin bindings ! The compatibility test of Marker applies solely to the boot / binding function in the interface area. For further information regarding function and compatibility, please refer to the instruction manuals of the ski boot manufacturer. 5 10 115 16.1 INSTALLATION OF MARKER KINGPIN BINDINGS