16.2 INSTALLATION OF MARKER KINGPIN & KINGPIN MWERKS BINDINGS 16.2 - 1 toe DRILLING THE ATTACHMENT HOLES: IMPORTANT ! sole length 255 - 269 mm 376 - 390 mm heel 16.2 - 2 ADJUSTMENT OF THE INSTALLATION TOOL 3.2 * Place the MARKER KINGPIN & ALPINIST installation tool W008T1T in the correct position on the ski. (16.2 - 1) ? 16.2 - 3 INSTALLING THE TOE: * Determine the requested mounting option: (16.2 - 2) A 16.2 - 4 MOUNTING OPTION B with crampon holder (16.2 - 4) * For mounting the toe with crampon holder mount the enclosed crampon holder B underneath the toe. B * Drill 4 holes for the toe through the front black drill bushings. * Drill 5 holes for the heel plate through the rear black marked drill bushings. * Remove the installation tool from the ski. REMARK: See DRILLING INSTRUCTIONS 3.2 tool length settings 270 mm 375 mm MOUNTING OPTION A without crampon holder (16.2 - 3) * For mounting the toe without crampon holder place the enclosed spacer A underneath the toe. 116 16.2 INSTALLATION OF MARKER KINGPIN & KINGPIN MWERKS BINDINGS