16.2 INSTALLATION OF MARKER KINGPIN & KINGPIN MWERKS BINDINGS 16.2 - 5 * Install the toe with the pre - installed screws in the front holes. * Mount the enclosed screws, tighten all screws lightly by hand, do not tighten them firmly. (16.2 - 5) 16.2 - 6 INSTALLING THE HEEL PLATE: * Install the heel plate with the pre - installed screws in the rear holes. * Tighten the screws lightly, then firmly. (16.2 - 6) 16.2 - 7 INSTALLING THE HEEL: * Slide the heel from the rear of the plate forward until it stops. (16.2 - 7) 16.2 - 8 * With strong pressure, screw the heel forward onto the plate by turning the forward pressure adjustment screw. (16.2 - 8) 16.2 - 9 CAUTION ! Screw the heel onto the heel plate by hand ! (16.2 - 9) 117 16.2 INSTALLATION OF MARKER KINGPIN & KINGPIN MWERKS BINDINGS