16.3 INSTALLATION OF MARKER KINGPIN DEMO BINDINGS 16.3 - 11 * Open the heel. (16.3 - 11) 16.3 - 12 * Position the tip of the ski boot between the retaining pins on the toe. Then press the tip of the boot down and step into the toe. (16.3 - 12) 16.3 - 13 * The pins must be locked fully into position in the insert, the toe opening lever has to snap to the " Ski " position. (16.3 - 13) 16.3 - 14 POSITIONING THE HEEL: * Place the ski boot into the binding and turn the adjustment screw until the position of the heel is approximately right. (16.3 - 14) 16.3 - 15 CHECK FORWARD PRESSURE: * Place the ski boot into the binding and close it. (16.3 - 15) 122 16.3 INSTALLATION OF MARKER KINGPIN DEMO BINDINGS