4.2 INSTALLATION OF MARKER DUKE PT 4.2 - 1 DRILLING THE ATTACHMENT HOLES: IMPORTANT ! sole length 240 - 269 mm 351 - 380 mm tool length adjustment 270 mm 350 mm See ADJUSTMENT OF THE BINDING INSTALLATION TOOLS 3.2 4.2 - 2 * Place the MARKER DUKE PT installation tool W014U1T in the correct position on the ski (6.2 - 1). * Drill 4 holes for the toe through the front drill bushings. * Drill 4 holes for the heel through the front drill bushings. * Remove the installation tool from the ski. REMARK: See DRILLING INSTRUCTIONS 3.2 INSTALLING THE TOE: 4.2 - 3 * Push the adjustment lever down with your hand and unlock the toe " Ski " (4.2 - 2) * Fold the toe " Ski " forward (4.2 - 3). 4.2 - 4 * Install the toe with the pre - installed screws in the front holes. * Tighten the screws lightly, then firmly (4.2 - 4). 4.2 - 5 * Close the toe " Ski " (4.2 - 5). 23 4.2 INSTALLATION OF MARKER DUKE PT