5.1 INSTALLATION OF MARKER BARON EPF 5.1 - 11 CHECK FORWARD PRESSURE: * Place the ski boot into the binding and close it. * Check if the forward pressure adjustment screw is flush with the back of the heel housing. (5.1 - 11) If this adjustment is incorrect, turn the screw until it is flush with the back of the housing. * Remove the ski boot 5.1 - 12 AFD HEIGHT ADJUSTMENT: The height of the AFD gliding plate must be adjusted to the height of the boot sole. 5.1 - 13 REMARK: In the original delivery condition the AFD gliding plate is adjusted to the alpine ski boot norm. 5.1 - 14 Turning the adjustment screw clockwise moves the AFD gliding plate up. Turning the adjustment screw counterclockwise moves the AFD gliding plate down. (5.1 - 12 and 5.1 - 13) 5.1 - 15 * Place the height test strip on the gliding AFD with the red marked side up. (5.1 - 14 and 5.1 - 15) 5.1 - 16 * Place the ski boot into the binding and close it. (5.1 - 16) 32 5.1 INSTALLATION OF MARKER ROYAL FAMILY BINDINGS