7.4 INSTALLATION OF WORLD CUP PISTON CONTROL INTERFACE DRILLING THE ATTACHMENT HOLES: 7.4 - 10 WCPC long / short WCPC plate WCPC optional * Place the World Cup Piston Control installation tool W002O1T or W002H1T (7.4 - 10) in the correct position on the ski. * Drill 4 holes for the front plate for short or long mounting position. (7.4 - 1 or 7.4 - 5) WCPC optional 7.4 - 11 REMARK: See DRILLING INSTRUCTIONS 3.2 INSTALLATION OF THE WORLD CUP PISTON CONTROL FRONT PLATE: * Install the World Cup Piston Control front plate using the 4 provided screws. (7.4 - 11) 7.4 - 12 INSTALLATION OF THE WORLD CUP PISTON CONTROL PLATE: * Insert the Flex element at the chosen position SL or GS / SG / DH (7.4 - 12) * Drill the holes for the chosen mounting version of the WCPC plate (7.4 - 2 or 7.4 - 3 for SL; 7.4 - 6 or 7.4 - 7 for GS / SG / DH) * Remove installation tool from the ski. 7.4 - 13 * Insert and slide the World Cup Piston Control plate into installed front plate. (7.4 - 13) 7.4 - 14 * Connect the World Cup Piston Control plate to the front plate using the front screw. (7.4 - 14) 7.4 - 15 * Insert the bushings and the screws for the chosen mounting version, tighten the rear screws in the pre - drilled mounting holes. (7.4 - 15) 57 7.4 INSTALLATION OF WORLD CUP PISTON CONTROL INTERFACE