11.1 INSTALLATION OF MARKER / BLIZZARD DEMO (FDT GRIPWALK) MODELS 11.1 - 1 IMPORTANT ! Xcell Demo, TPX Demo, TLX Demo, TCX Demo, TLT Demo and TPC Demo bindings are designed to mount only in conjunction with Blizzard skis with premounted plate system. The suitable ski models are listed on the set label or can be requested from Blizzard. REMARK: 11.1 - 2 ( 18.3) The binding models Xcell Demo, TPX Demo, TLX Demo, TCX Demo, TLT Demo and TPC Demo GRIPWALK are designed for the following standard boot soles: * Alpine ski boots for adults ISO 5355 * Touring ski boots for adults ISO 9523 with the additional marking " Gripwalk® " INSTALLING THE TOE: * Open the locking lever and slide the toe from the center of the plate forward. (11.1 - 1 & 11.1 - 2) REMARK: 11.1 - 3 When mounting the binding models on the FDT Race plate system slide the toe piece from the front onto the plate. CAUTION ! Make sure that the toe spacer rails engage both sides of the base plate properly. 11.1 - 4 * Slide the toe to the correct sole length in accordance with the front sole length scale. (11.1 - 3) * Close the toe locking lever. (11.1 - 4) 77 11.1 INSTALLATION OF MARKER / BLIZZARD SYSTEMS