13.8 REPLACING SKI BRAKES 13.8 - 1 REPLACING THE SKI BRAKES FDT JUNIOR REMARK: For the binding models FDT Junior the brake with the premounted heel platform is used.(13.8 - 1) 13.8 - 2 DEMOUNT THE SKI BRAKE: * Remove the attachment screw of the ski brake (13.8 - 2). * Pivot the rear brake platform hooks carefully to remove the ski brake (13.8 - 3). 13.8 - 3 INSTALL THE NEW SKI BRAKE: * Engage the front of the brake platform and feed the rear hooks into the notches of the spacer. Make sure that the new brake is locked in place. (13.8 - 4 and 13.8 - 5). 13.8 - 4 * Tighten the attachment screws carefully by hand. (13.8 - 6) 13.8 - 5 IMPORTANT ! Tighten the screws by hand, do not use a power drill ! REMARK: The wide ski brakes are replaceable in the same manner. 13.8 - 6 see BRAKE CHART 18.2 max. 4 Nm 91 13.8 REPLACING SKI BRAKES