13.9 REPLACING SKI BRAKES 13.9 - 1 REPLACING THE SKI BRAKES JUNIOR EPS REMARK: For the binding models Junior EPS the premounted heel platform has to be replaced by the enclosed EPS heel platform. (13.9 - 1) 13.9 - 2 DEMOUNT THE SKI BRAKE: * Remove the attachment screws of the ski brake (13.9 - 2). 13.9 - 3 * Pivot the rear brake platform hooks carefully to remove the ski brake (13.9 - 3). 13.9 - 4 INSTALL THE NEW SKI BRAKE: * Engage the front of the brake platform and feed the rear hooks into the notches of the spacer. Make sure that the new brake is locked in place. (13.9 - 4 and 13.9 - 5). * Tighten the attachment screws carefully by hand. (13.9 - 6) 13.9 - 5 IMPORTANT ! Tighten the screws by hand, do not use a power drill ! REMARK: 13.9 - 6 The wide ski brakes are replaceable in the same manner. see BRAKE CHART 18.2 92 13.9 REPLACING SKI BRAKES