JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 28

Trends g…/… Italian guidelines: on the use of innovative materials for structural purposes in an appendix. FRP bars used as reinforcement in concrete structures shall undergo inspections to ensure a satisfactory level of both mechanical and physical properties. The following is required: • Factory Production Control (FPC) shall relate to the geometrical, mechanical (stiffness and strength) and physical properties of the FRP bars as discussed in the following sections; • the bar manufacturer shall use base materials (fibre and resin) certified by their supplier. bar mechanical properties are reported in Appendix C. Conclusions Through the technical documents described in this article, the Italian National Research Council has contributed to better knowledge of composite materials within the Italian professional community, to the definition of design principles and application rules accepted by the Italian scientific community and to the standardisation of test procedures for the mechanical characterisation of FRP materials. Contact: l.ascione@unisa.it More information: www.cnr.it All the documents are available for download on this web site. Fibre-reinforced concrete structures The document entitled “Guide for the Design and Construction of FibreReinforced Concrete Structures” deals with the structural use of fibrereinforced concrete (FRC). FRC is a concrete material incorporating short steel fibres and polymeric, inorganic (carbon or glass) or natural fibres. Adding fibres to concrete makes it significantly more resistant to traction after cracking. FRC applications of relevant interest include: load-bearing front panels, paving slabs, beams, structural joints and nodes, jacketing elements, structures subject to impacts and/or fatigue, railway sleepers, high tension poles, etc. (Figure 6). References [1] L. Ascione, A. Benedetti, R. Frassine, G. Manfredi, G. Monti, A. Nanni, C. Poggi, E. Sacco: “Design guidelines for the strengthening of existing structures with FRP in Italy”, International Conference FRPRCS7, New Orleans, 2005. [2] L. Ascione, L. Feo: “Design guidelines for the strengthening of reinforced concrete and masonry structures with FRP in Italy (CNR-DT 200/2004)”, International Conference on Composites Engineering (ICCE/12), Tenerife, Spain, 2005. [3] L. Feo: “Advanced composites as strengthening materials for civil constructions: state of the art and modern code developments in Italy”, International Conference on Composites Engineering (ICCE/14), Boulder, Colorado, USA, 2006 (keynote). [4] L. Ascione, A. Benedetti, A. Borri, A. Di Tommaso, L. Feo, R. Frassine, G. Manfredi, G. Monti, A., M., C. Poggi, E. Sacco: “Italian design guidelines for the strengthening of existing civil constructions using externally bonded fibre-reinforced polymers”, Third International Conference on FRP Composites in Civil Engineering (CICE 2006), December 13-15, 2006, Miami, Florida, USA. [5] L. Ascione, G. Manfredi, G. Monti, A. Nanni: “The new Italian design guidelines Fig. 5: Trout River Bridge, AICan Highway (British Columbia). Product sampling and testing of the product samples shall be carried out regularly in the manufacturing plant. Both mechanical and physical qualification tests shall be carried out by a certified laboratory provided with the necessary equipment and experience in the characterization of composite materials. If the factory laboratory is either not available or not certified, the qualification tests shall be carried out by an external laboratory certified in the characterisation of composite materials. The mechanical characteristics reported in the technical data sheets of the products shall be obtained through a statistical analysis, including the characteristic values, percentile, sample mean, sample standard deviations, confidence intervals, and the number of samples tested. Suitable partial factors of the semi-probabilistic method should be employed for the characteristic values evaluated. Test methods for characterising the FRP- Fig. 6: Oceanographic Museum (Valencia). The document deals with the following issues: • materials: fibres, matrices, fibre-reinforced concrete properties; • basic design concepts: safety factors, durability requirements; • ultimate limit state: one-dimensional and two-dimensional elements; • serviceability limit state: tension verification, crack opening; • execution: mixture composition, reinforcement positioning, minimum size, laying execution; • fire resistance; • testing and production control. The document also has five appendices devoted to several theoretical aspects that are briefly discussed in the instructions and, due to their innovative nature, merit further mention with an informative aim. JEC Composites Magazine / No34 July-August 2007
http://www.cnr.it

JEC COMPOSITES MAGAZINE - Issue #35 - September 2007

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #35 - September 2007

Edito
CONTENTS
NEWS WORLDWIDE
- Companies
- Agenda of events
- 2008 JEC Singapore
BUSINESS
- Market survey
- Niche markets
- Trends
- Human capital
FEATURE - MARINE
- Market
- Raw Materials
- Process
- Application
USERS’ PLATFORM
- Composites in the world
- Successful partners
- Applications
KNOW-HOW
- Warp knitting technology
- Testing
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 1
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 2
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - Edito
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 4
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 5
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - CONTENTS
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 7
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Companies
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 9
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Agenda of events
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 11
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - 2008 JEC Singapore
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 13
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 14
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 15
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Market survey
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 17
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 18
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 19
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 20
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 21
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 22
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 23
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Niche markets
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 25
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Trends
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 27
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 28
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 29
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Human capital
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 31
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Market
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 33
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Raw Materials
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 35
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 36
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 37
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 38
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 39
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Process
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 41
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 42
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 43
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 44
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 45
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 46
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 47
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Application
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 49
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Composites in the world
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Successful partners
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 52
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 53
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 54
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 55
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 56
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 57
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Warp knitting technology
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 59
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 60
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 61
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 62
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - - Testing
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 64
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 65
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 66
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 67
JEC COMPOSITES MAGAZINE - Issue #35 - September 2007 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com