JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 31

Market Market forecast for 2009-2013 No slow-down in global wind developments as China continues expansion Every year, the annual report of the Global Wind Energy Council (GWEC) provides forecasts for the development of the global wind energy market for the next five years. In the past, each of these estimates was exceeded by the actual market growth. In 2006, the report predicted that 16.8 GW would be installed in 2007 – it turned out to be close to 20 GW. Last year, the forecast was for 23.1 GW, but the reality was 27 GW. Prognostication is always difficult, and even more so in times of economic uncertainty. However, despite the financial crisis and its ramifications for the ‘real’ economy, which of course also includes the wind sector, GWEC has once again raised its projections for the coming period. Over the past three or four years, two markets have continuously outperformed the most optimistic expectations – the US and China. For the next year or two, developments in the US will be hampered by a lack of financing and the overall economic downturn. At the same time, growth in China is set to continue at a breathtaking rate, and this will drive a substantial increase in global wind energy installations in the coming years. Focus China continued its spectacular growth in 2008, once again doubling its installed capacity by adding about 6.3 GW, to reach a total of 12.2 GW. Future growth prospects for the Chinese market are very good. In response to the financial crisis, the Chinese government has identified the development of wind energy as one of the key economic growth areas, and in 2009, the new installed capacity is expected to nearly double again. At this rate, China is on its way to overtake Germany and Spain to reach second place in terms of total wind power capacity in 2010. This means that China would have met its 2020 target of 30 GW ten years ahead of time. GWEC predicts that in 2013, five years from now, global wind generating capacity will stand at 332 GW, up from 120 GW at the end of 2008. In 2013, 56.3 GW of new capacity will be added to the global total, more than doubling the 2008 annual market. The annual growth rates during this period will average 22.4% in terms of the total installed capacity, and 15.8% for the annual market. These rates are modest compared to past developments. In the last ten years, an average increase of 28.2% was recorded for total capacity and 28.3% for annual capacity. Regional distribution © GWEC – Global Wind 2008 Report The continued expansion of the global wind generation capacity is driven by three regions: Asia, Europe and North America. Global cumulative installed capacity 1996-2008. Annual installed capacity by region 2003-2008. Asia is expected to be the fastest growing region in the world as of this year, driven mainly by China, which has been doubling its installed capacity every year for the past four years and is set to continue the rapid upscaling of its wind capacity to become the world’s largest annual market. Annual additions in China are expected to reach more than 20 GW by 2020. This development is underpinned by a very aggressive government policy supporting the diversification of the electricity supply, the growth of the domestic industry and significant investments in the transmission needed to get the electricity to market. © GWEC – Global Wind 2008 Report No49 June 2009 / jec composites magazine 31

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #49 - June 2009

Cover
Index
Contents
- NEWS WORLDWIDE -
CompaniesMergers and acquisitions /Opening/Development /Partnership
3B: a high-quality fibreglass supplier
DK Composites: a player that has made a name for itself
Agenda of events
Equipment Innovative robotic solutions for fibre placement
- BUSINESS -
Market survey Indian distributors of raw materials for composites
Trends Subcontracting in aviation: a rapidly changing sector
Niche market Composites conform to creation
Human capital NCC: a global source for commercialization, manufacturing acceleration and incubation
- FEATURE -
Market 2009-2013: no slow-down in global wind developments
Design Composite wind turbine blade design: leveraging aerospace advances
Reinforcement New composite hybrid reinforcements for the wind turbine industry
Resins Advanced epoxy technology for wind turbine blades
Foam Breakthrough in structural PET foam core materials
Adhesive Turbine blade bonding
Production Automated blade production for wind energy plants
UT scans to ensure blade quality
Application An innovative composite wind turbine: for homeowners and professionals
- USERS’ PLATFORM -
Composites in the world - An astonishing chair
 - “Light car - Open Source”
The Greenbirdproject: 203 km/h just using wind
Lightweight hand-launched glider
Successful partners Innovative architectural cladding
Application GRP pipe system for Cancéropôle stormwater network
Composite system has capital solution for park odours
Composite drives team in first zero-emission race
- KNOW-HOW -
Materials Fibre-reinforced cores
Release agents Mould release system for the marine industry
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Cover
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 2
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 3
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 4
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Index
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Contents
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 7
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - CompaniesMergers and acquisitions /Opening/Development /Partnership
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Pub1
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Pub2
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 3B: a high-quality fibreglass supplier
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 10
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - DK Composites: a player that has made a name for itself
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 12
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 13
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Agenda of events
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 15
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Equipment Innovative robotic solutions for fibre placement
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 17
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 18
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - - BUSINESS -
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Market survey Indian distributors of raw materials for composites
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 21
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Trends Subcontracting in aviation: a rapidly changing sector
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 23
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Niche market Composites conform to creation
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 25
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Human capital NCC: a global source for commercialization, manufacturing acceleration and incubation
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 27
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 28
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - - FEATURE -
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Market 2009-2013: no slow-down in global wind developments
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 31
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 32
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 33
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Design Composite wind turbine blade design: leveraging aerospace advances
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 35
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Reinforcement New composite hybrid reinforcements for the wind turbine industry
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 37
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 38
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Resins Advanced epoxy technology for wind turbine blades
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 40
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 41
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Foam Breakthrough in structural PET foam core materials
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Adhesive Turbine blade bonding
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 44
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Production Automated blade production for wind energy plants
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 46
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - UT scans to ensure blade quality
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Application An innovative composite wind turbine: for homeowners and professionals
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 49
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 50
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - - USERS’ PLATFORM -
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 -  - “Light car - Open Source”
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Lightweight hand-launched glider
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Successful partners Innovative architectural cladding
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 55
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Application GRP pipe system for Cancéropôle stormwater network
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Composite system has capital solution for park odours
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Composite drives team in first zero-emission race
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - - KNOW-HOW -
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Materials Fibre-reinforced cores
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 61
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 62
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - Release agents Mould release system for the marine industry
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 64
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 65
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 66
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 67
JEC COMPOSITES MAGAZINE - Issue #49 - June 2009 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com