JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 31

Infusion

After applying the vacuum film, the structure was tested for leaks and the BIV 800 epoxy resin was drawn in through the resin feed hoses and distributed over the entire component. The infusion The carbon fibre fabric is placed dry into the epoxy procedure takes no mould more than 60 minutes for each part, so YSA Yacht Design achieved considerable time savings compared with the conventional hand lamination method, while producing lighter parts of the same strength. This resulted in an extremely light catamaran with a perfect carbon fibre surface.

component, which means there is virtually no thickness change. The carbon fabrics can be positioned without any time constraints, and there are no pot life restrictions. Moreover, a faster demoulding time is possible through the use of resins with a short pot life. Such time savings are most notable for larger parts using a core material. The fact that the carbon entire component fibre is applied dry results in clean working conditions, with significantly reduced emissions. Compared with hand lamination using vacuum bagging, further advantages include a lower resin content in the parts and a lower resin volume requirement for larger parts. Vacuum infusion also has advantages over prepreg/autoclave processes: there is no need to purchase an autoclave and thick laminates are made in one working step, so no debulking is necessary. Compared with Resin Transfer Moulding (RTM), the advantages lie in lower tool costs. In addition, there is no need for an expensive injection system. For lot sizes under 100 parts, the vacuum infusion process proves to be far more economical. The success of the YSA Competition Cat 30 demonstrates the interest of the vacuum infusion process. More information: www.ebalta.co.uk www.ebalta.de
The epoxy infusion resin BIV 800 is pulled in and distributed across the

Comparison of fibre volume contents for various manufacturing processes

Process advantages
The vacuum infusion method also brings further advantages because it provides improved, consistent quality for all parts, so that uniform impregnation can be achieved without pinholes. The infused resin content varies by less than 0.5% across the

The JEC Composites Magazine is available ONLINE on
www.jeccomposites.com/magazine-subscription (FREE Subscription)
30,391 copies total qualified circulation, BPA Worldwide, November/December issue 2009 (18,690 Print circulation and 11,701 Electronic circulation)

No59 August - September 2010 / jec composites magazine

31


http://www.ebalta.co.uk http://www.ebalta.de http://www.jeccomposites.com/magazine-subscription

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010

Cover
Contents
NEWS WORLDWIDE
Goodrich Corporation acquires Crompton Technology Group
Reichhold expands manufacturing capacity in Turkey
LAP wins order from Airbus
Toho Tenax Europe to supply carbon fibre for Bombardier Cseries
Glass Fibre - A global competition for breakthrough composite applications
Agenda of events
Innovation - Phenolic prepreg products for interior applications
BUSINESS
Market survey: China Yuan Long FRP broadens its range of skills beyond pultrusion
Shanghai Tung Hsing Technology: steady growth through diversified markets
Niche Market Bio-based polymers: a revolutionnary change
Trends Kenaf, a fibre for the future: the Harusmas experience
Mechanical properties of naturalfibre-reinforced composites
FEATURE
Design - Wave impact resistance of racing yacht composites
Infusion - Regatta racing at the highest level
Adhesive - Flame-retardant adhesive for power packs in marine applications
Control - Validation of marine structures - Testing appraoches
Resin - New styrene-free resin: better for Catamaran Cruisers and the environment
VOC - Presatured wipes reduce VOC emissions
High performance - 48 days, 7 hours, 44 minutes around the world
USERS' PLATFORM
Composites in the world
Ying Yang table
The most luxurious golf car ever made
New carbon fibre band watch
Successful partners - A prefabricated FRP bridge for the oil and gas industry
Low-cost structural thermoplastic composites for transport
Making modular bus body shells from composite materials
Tougher fire-rated bus parts thanks to intumescent topcoat
KNOW-HOW
Bonding - Composite bonders - meeting the requirements of modern engineering
Manufacturing - ESTRIM - a fast-demoulding injection technology for epoxy composites
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Cover
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 2
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 3
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 4
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 5
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Contents
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 7
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Toho Tenax Europe to supply carbon fibre for Bombardier Cseries
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Glass Fibre - A global competition for breakthrough composite applications
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 10
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Agenda of events
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Innovation - Phenolic prepreg products for interior applications
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 13
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Market survey: China Yuan Long FRP broadens its range of skills beyond pultrusion
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Shanghai Tung Hsing Technology: steady growth through diversified markets
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 16
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Niche Market Bio-based polymers: a revolutionnary change
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 18
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 19
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 20
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Trends Kenaf, a fibre for the future: the Harusmas experience
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 22
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 23
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Mechanical properties of naturalfibre-reinforced composites
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 25
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 26
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 27
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Design - Wave impact resistance of racing yacht composites
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 29
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Infusion - Regatta racing at the highest level
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 31
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Adhesive - Flame-retardant adhesive for power packs in marine applications
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 33
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 34
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Control - Validation of marine structures - Testing appraoches
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 36
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 37
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Resin - New styrene-free resin: better for Catamaran Cruisers and the environment
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 39
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - VOC - Presatured wipes reduce VOC emissions
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 41
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 42
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - High performance - 48 days, 7 hours, 44 minutes around the world
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 44
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 45
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - New carbon fibre band watch
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Successful partners - A prefabricated FRP bridge for the oil and gas industry
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 48
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 49
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Low-cost structural thermoplastic composites for transport
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 51
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 52
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Making modular bus body shells from composite materials
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 54
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Tougher fire-rated bus parts thanks to intumescent topcoat
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 56
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 57
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Bonding - Composite bonders - meeting the requirements of modern engineering
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 59
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 60
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 61
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 62
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - Manufacturing - ESTRIM - a fast-demoulding injection technology for epoxy composites
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 64
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 65
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 66
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 67
JEC COMPOSITES MAGAZINE - Issue #59 - August/September 2010 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com