JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 42

FEATURE “Automotive”
g…/… FRP recycling in Europe, North America and the Pacific Rim area
Fig.11: Process flow of FRP recycling using sub-critical water hydrolysis

Environment

42

the reaction liquid. The recovered glycol was polymerized with new resin raw materials to produce the recycled UP resin. The SFC was modified to be enhanced to the recycled LPA which has a shrinkage control effect. These recycled inorganic materials, recycled UP resin and recycled LPA were mixed with new raw materials to produce recycled SMC sheets. The recyclates were horizontally recycled into FRP through hot-press curing of the recycled SMC sheets. Figure 12 shows future prospects. We have been developing a technology designed to scale up the plant, reduce the cost of the SFC separation and modification process, and improve the quality of the recyclate. A pilot plant for subcritical water hydrolysis 10 times larger than the bench plant is under construction based on the experimental test results. The vessel volume was designed to test 400 kg of FRP per operation (20 bath tubs, 0.8 metric tons daily). Pilot testing will start soon. We plan to start treating FRP bathtub manufacturing waste so as to reach an FRP horizontal recycling objective of 200 metric tons annually by 2012. In the future, the potential of this technology will be explored for waste
Fig.12: Future prospects

FRP bathtubs and other waste FRP products such as pleasure boats, tanks, automotive parts, etc. If the recycling issue is solved based on this technology, the use of FRP automotive parts will expand more rapidly. This should contribute to the prevention of global warming globally through lighter cars. Moreover, new applications for these unique functional polymers derived from waste FRP are also being explored. More information: taka.natagawa@panasonic-denko.co.jp Acknowledgements This research was supported by the Ministry of Economy, Trade and Industry, and conducted with the International Centre for Environmental Technology Transfer. Professor Hiroyuki Yoshida of Osaka Prefecture University provided technical advice for subcritical water hydrolysis. We also cooperated with Showa High Polymer Co., Ltd. for the trial production of an SMC board sample. This article appeared once in Review of Automotive Engineering. References [I] Kubota. S. et al., Chemical recycling of unsaturated polyester wastes by decomposition in glycol (in Japanese with English summary), Network Polymer, Vol. 24, No. 1, pp. 22-29 (2003) [2] Nakagawa, T. et al., FRP recycling technology using subcritical water hydrolysis (in Japanese with English summary), Network Polymer, Vol. 27, No.2., pp. 28-35 (2006) [3] Nakagawa, T. et al., FRP recycling technology using subcritical water hydrolysis (in Japanese), Proceeding of the 55th Network Polymer Symposium Japan 2005, pp. 129-132 (2005)

jec composites magazine / No61 November - December 2010



JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010

Cover
Contents
NEWS WORLDWIDE
Companies
Spirit AeroSystems and GOL Linhas Aereas Inteligentes enter into agreements
CTRM and CTL to commercialize composites testing in Asia
IDI Composites International announces installation of automated BMC production line
Umeco and Shanghai Leadgo Technology form a joint venture in China
SAIC awarded USD 11 million contract to deliver manufacturing facility for composite building materials
Airbus completes allocation of A350 XWB airframe work packages to China
Hexagon Composites signs new major contract with Daimler AG
National Aerospace Laboratories: incisive know-how
Innovations - Twelve companies rewarded by JEC and CCE for their composites innovations
Agenda of events
Equipment: Welding - Increasing bond strength and reducing defects in ultrasonic welding
BUSINESS
Market survey - Aerospace composites in Quebec: a wealth of players and R&D
AN INTERVIEW WITH JACQUES CABANA PRESIDENT & GENERAL MANAGER FDC COMPOSITES Inc.
Niche Market - Tool-side breathing allows BAE Systems to manufacture its new UAV
Trend - Composites and the carbon label
FEATURE - AUTOMOTIVE
Data - World ranking of manufacturers years 2009
Trend -Formula One experience to drive forward other industries
Application - BMW's MCV, the first mass produced car with a carbon passenger cell
An interesting solution for NASCAR race engine alternators
Prepreg materials investigated as a storage battery for future cars
Research & Development - Lamborghini prepares for the future with a new carbon-fibre research development
Environment - How adhesives reduce emissions, minimize waste and improve recycling
FRP recycling in Europe, North America and the Pacific Rim area
USER'S PLATFORM
Composites in the world - Agile as a snake for ice climbing
Recyclable emergency snow shovel
Superbus: an innovative public transport concept
Successful partners - Conseil & Technique, an SME dedicated to the development of new products
Application - Advanced graphite composite bipolar plate for fuel cells
KNOW-HOW
Software - four factors drive the development of superior wind blades
Simulation - Bespoke simulation for thermoplastic composite
Raw material - Latent acid catalysts for process control phenolics
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Cover
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 2
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 3
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 4
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 5
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Contents
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 7
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Hexagon Composites signs new major contract with Daimler AG
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - National Aerospace Laboratories: incisive know-how
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Innovations - Twelve companies rewarded by JEC and CCE for their composites innovations
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Agenda of events
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Equipment: Welding - Increasing bond strength and reducing defects in ultrasonic welding
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 13
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Market survey - Aerospace composites in Quebec: a wealth of players and R&D
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 15
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - AN INTERVIEW WITH JACQUES CABANA PRESIDENT & GENERAL MANAGER FDC COMPOSITES Inc.
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 17
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Niche Market - Tool-side breathing allows BAE Systems to manufacture its new UAV
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Trend - Composites and the carbon label
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 20
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 21
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 22
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 23
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Data - World ranking of manufacturers years 2009
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 25
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Trend -Formula One experience to drive forward other industries
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 27
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Application - BMW's MCV, the first mass produced car with a carbon passenger cell
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 29
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - An interesting solution for NASCAR race engine alternators
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Prepreg materials investigated as a storage battery for future cars
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Research & Development - Lamborghini prepares for the future with a new carbon-fibre research development
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 33
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Environment - How adhesives reduce emissions, minimize waste and improve recycling
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 35
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 36
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - FRP recycling in Europe, North America and the Pacific Rim area
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 38
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 39
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 40
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 41
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 42
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 43
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Superbus: an innovative public transport concept
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Successful partners - Conseil & Technique, an SME dedicated to the development of new products
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 46
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Application - Advanced graphite composite bipolar plate for fuel cells
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 48
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 49
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Software - four factors drive the development of superior wind blades
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 51
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 52
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Simulation - Bespoke simulation for thermoplastic composite
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 54
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 55
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 56
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - Raw material - Latent acid catalysts for process control phenolics
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 58
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 59
JEC COMPOSITES MAGAZINE - Issue #61 - November/December 2010 - 60
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com