JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 51

offer gust load alleviation in wind turbine
blades.

angles and thick unitape which is 600
gsm, or 4 times heavier. Homogenization is achieved when the total laminate
consists of many identical sub-laminates.
The resulting laminate is stronger and
tougher than a laminate made of thick
unitape (at 150 gsm or higher) or thicker
sub-laminates with many more than 2
or 3 ply angles. There are 12 different
ways to stack a 4-ply-angle sub-laminate,
e.g. [0/90/45/-45], [0/45/90/-45],
etc. When the number of plies in a
sub-laminate increases further, there are
hundreds or thousands of stacking possibilities. Ply stacking is not optimized
in practice, so there is no rational way to
determine how optimum a composite
structure is if it is not homogenized. On
the other hand, topology optimization
of a homogenized composite structure
is practical. C-Ply TM is suited to offer
the best sub-laminate, due to its easily
achieved combinations of materials (carbon versus glass), ply thicknesses (thick
or thin combinations) and continuous
variable in the off-axis angles (from 20 to
30, and 45 and up).

Ply drop as it is practiced today is a black
art. The rules governing ply drops are
more concerned over the local stress
concentration as stipulated by the ply
thickness drop, the distance between
drops. Ply drop also requires the maintenance of mid-plane symmetry. Thus,
mid-plane symmetrical plies are dropped
simultaneously. We would recommend
that ply drop be treated as a topology
optimization issue. The same methodology for determining the tapering in
aluminium structures should be used.
Finally, strain allowable is treated incorrectly as a scalar quantity (like density,
temperature, voids, thickness and safety
factor). Although this simple number
is easy to accept, it is mathematically
wrong. Strain, like stress, is dependent
on the reference coordinates. It does not
remain constant as the coordinate axes
change. The safety factor is a scalar, and
thus more appropriate, measure; failure
strain or its allowable is not. Because of
anisotropy, composite laminates do not
behave like aluminium. Their Poisson’s
ratios can be larger than 0.5, and stress
and strain respond to loads in totally
different ways. It is a huge disservice to
express allowable strain by a single number irrespective of the applied load and
the ply combination of a laminate.

Why does C-PlyTM use
two ply angles?
C-Ply TM is a non-crimp fabric (NCF) developed by Chomarat. Among its unique
features are the thin plies of carbon fibres
made by spreading large tows into highquality plies before stitching. Each ply
weighs 75 grams per square meter (gsm),
equal to half the weight of conventional
unitape. Thinner plies are also possible.
C-Ply TM is unique in that it can have
2 plies, including one [0] ply and an
off-axis ply with an angle of either 20 to
30 degrees or 45 degrees or higher. In
the case of shallow angles (30 degrees or
less), two plies can be better matched to

Fig. 2: C-PLY™ Bi-Angle construction

take the applied load; i.e., the resulting
ply failures are closer to each other so the
first-ply-failure envelopes are higher than
in the case of a cross-ply laminate such
as [0/90], where one of the plies would
fail at a much lower applied load than
the other. So [0] and [90] plies have
totally different, and incompatible, loadcarrying capabilities that make them
mismatched plies. C-Ply TM has two better-matched ply angles. This matching is
particularly useful for combined bending
and twisting loads that are common in
wings, shafts and other beam-like structures. Shallow angles allow designing
stronger micro-crack-free laminates.

Homogenized laminates
The combination of two angles and thin
plies results in a 150 gsm sub-laminate,
as compared with the conventional 4

A homogenized laminate automatically
becomes symmetric. Sub-laminates can
be stacked continuously without concern
about the location of the mid-plane, and
about the mirror image of the stacking
below and above the mid-plane. Laminates become increasingly insensitive to
thermal warpage as the number of sublaminates increases. The residual curing
stress across the laminate is uniform in
all laminate orientation directions. The
in-plane and flexural stiffness is equal
and the governing equations of motion,
vibration and buckling are all much
simplified. Many closed-form solutions
are available. Confidence in analysis
and design thus increases. There is no
effect of stacking sequences and only ply
combinations matter, so that ply layups
with gaps and laps are less of a concern.
This makes composites less sensitive to
defects.
All these features make optimization
simple and achievable. These advantages
do not exist in the black aluminium

No78 January - February 2013

/ jec composites magazine 51



JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013

Cover
Edito
Point of view: bespoke solutions
Contents
Agenda of Events
COMPANY & BUSINESS In Brief
- Glass fibre
APPLICATIONS
- Bridge
- Music instrument
MARKET Overview 2012
FEATURE WIND ENERGY
- Market
- Resin
- Structure
- Prepreg
- Natural fibre
- China
RESEARCH & DEVELOPMENT
- Repair
- Bonding
TECHNOLOGY & INNOVATIONS
- RTM
- Laminate
- Aerospace
Index
In the world
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - Cover
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 2
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - Edito
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - Point of view: bespoke solutions
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 5
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - Contents
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 7
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - Agenda of Events
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - COMPANY & BUSINESS In Brief
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 10
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Glass fibre
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 12
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Bridge
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 14
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Music instrument
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - MARKET Overview 2012
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 17
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 18
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 19
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 20
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 21
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 22
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 23
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 24
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Market
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 26
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Resin
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 28
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 29
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Structure
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 31
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Prepreg
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 33
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Natural fibre
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 35
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 36
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 37
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - China
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 39
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 40
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Repair
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 42
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 43
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Bonding
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 45
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 46
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - RTM
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 48
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 49
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Laminate
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 51
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 52
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - - Aerospace
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 54
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 55
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 56
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - Index
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - In the world
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 59
JEC COMPOSITES MAGAZINE - Issue #78 - January/February 2013 - 60
https://www.nxtbook.fr/newpress/jeccomposites/jcm2211_148
https://www.nxtbook.fr/newpress/jeccomposites/jcm2209_147
https://www.nxtbook.fr/newpress/jeccomposites/jcm2206_146
https://www.nxtbook.fr/newpress/jeccomposites/jcm2204_145
https://www.nxtbook.fr/newpress/jeccomposites/jcm2201_144
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com