JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 56

cutting
More information ...

Plataine's Total Production Optimization
(TPO) software solutions bridge the
gap between customer, manufacturing
and engineering requirements. TPO
integrates data from the ERP's order
management and inventory warehouse
modules, CAD software, and production
floor systems to automatically create
optimized production plans. Plataine's
offers the TPO solutions on a Softwareas-a-Service (SaaS) basis.

Fig. 1: Remnant utilization

Fig. 2a: Multi-kit nesting (combined nest)

Fig. 2b: Multi-kit nesting (back to back)

The following examples discuss some
of these techniques showing the savings
provided by an 'enterprise-level' solution.

Remnant utilization
While nesting software can create the
most efficient nest, the machine operator
still needs to provide enough material
for that particular nest. In such cases, any
shorter rolls left in stock may not be used
and will eventually expire. Taking a broader approach and using an 'enterprise-level' solution - which considers the actual
material available in the freezer and nests

a single kit over multiple rolls - allows
using the short rolls in stock before they
expire.
Figure 1 shows an example where a
single kit is nested over two partial rolls.
Initially, 5.24 metres of new material
were used and now only 5.10 metres are
required. So the yield is improved by
2.7%, and two rolls which would total a
little more than 10% of a 50-metre roll
are used instead of being discarded.

Multi-kit nesting
Often, two orders requiring the same

56 jec composites magazine / No86 January - February 2014

material are cut from two different rolls
simply due to a lack of communication
between the orders platform and the
cutting platform. A holistic approach
integrates the production floor with the
CAD and ERP systems, enabling the
nesting of multiple kits together.
Figures 2a and 2b show two different
examples of nesting two kits together. In
the first instance (2a), the kits are mixed,
thus maximizing the material yield.
Instead of producing two separate kits
each using 5.24 metres of material, the
kits are mixed into a single nest and use
9.88 metres as opposed to 10.48 metres.
This results in a further yield improvement of 5.7%.
In the second example (2b), the two
orders are nested back to back, still
improving yield but making the kits
a little easier to pick from the cutting
table. However, just like in the kit mixing
example, since the role only has to be
thawed once, it results in reduced labour
and setup time, as well as increased outtime on the roll. n
More information:
www.plataine.com


http://www.plataine.com http://www.JECmagazine.com

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014

Cover
Edito
Point of view: volume production
Contents
Agenda of Events
COMPANY & BUSINESS
In Brief
Advanced materials
APPLICATIONS
Cargo
Marine
E-car
Motorcycle
MARKET
Glass fibre
Overview 2013
FEATURE PREPREG
Laminates
Paper
Equipment
Technology
Carbon fibre
Formulation
Process
Investment
Tool
RESEARCH & DEVELOPMENT
Additive manufacturing
Class A
TECHNOLOGY & INNOVATIONS
Cutting
PVC
Recycling
Design
Filament winding
Index
In the world
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Cover
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 2
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Edito
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Point of view: volume production
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 5
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Contents
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 7
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Agenda of Events
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 9
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - In Brief
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Advanced materials
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 12
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 13
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Cargo
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Marine
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 16
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - E-car
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Motorcycle
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Glass fibre
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 20
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 21
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 22
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 23
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Overview 2013
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Laminates
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 26
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 27
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 28
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Paper
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 30
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Equipment
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 32
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 33
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Technology
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 35
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 36
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Carbon fibre
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 38
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 39
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Formulation
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 41
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 42
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Process
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 44
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Investment
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Tool
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 47
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 48
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Additive manufacturing
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 50
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 51
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 52
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Class A
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 54
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Cutting
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 56
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - PVC
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 58
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Recycling
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 60
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Design
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 62
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 63
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Filament winding
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - Index
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - In the world
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 67
JEC COMPOSITES MAGAZINE - Issue #86 - January/February 2014 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com