JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 152

TECHNOLOGY FMEL

Fig. 1: Finished steel and FMEL specimens (left); cutting profile of an FMEL specimen (right)

Fig. 2: Layer setup and preformed laminates of the FMEL specimen

by HACOTECH GmbH was used, which consisted of a 0°/90°
carbon fibre weave impregnated with an epoxy resin matrix. The
steel sheets were S235 steel in 1 mm thickness. Two types of elastomers were used in the laminate in order to balance the damping performance and laminate adhesion: HVV9632/59 (less
damping but better adhesion) and SUT9609/24 (better damping but less adhesion) from KRAIBURG GmbH & Co. KG. The
parameters of the compression moulding process were adapted
from previous research [3]. The process lasted 60 minutes with
a resulting pressure of 23 bar on the laminate surface and a tool
temperature of 130°C. The cured laminates were then water cut.
After the specimens were manufactured, the dynamic behaviour
and bending stiffness of both types of specimens were investigated and compared. An experimental modal analysis, or more specifically, impact test, was conducted to investigate the dynamic
behaviour of both types of specimens including resonance frequencies, vibration patterns (Eigenforms) and damping ratios.
An FEM model was used as an aid to identify the Eigenforms.
The bending test was conducted by fixing one end of the specimen onto a steel structure with screws and applying a load on
the other end, thus imitating the loading conditions of a real machine spindle housing in operation. Strain gauges were applied
to the specimens to measure deformation. A concept for joining
the FMEL material to a steel structure was also investigated and
tested during the bending experiment. A pair of steel adapters
with a short jacket structure was designed (Figure 3). The adapters were connected to the FMEL specimen with epoxy adhesive,
and joined with the steel structure using M10 screws on the other

152

Fig. 3: CAD illustration of the adapter joining system

side. A Scotch Weld DP490 epoxy adhesive from 3M was used in
this research.

Results
The finished FMEL specimens offered good surface quality and
laminate bonding, with no pores at the specimen cut edges and
only minor delaminations near the corners. The specimen thickness, however, was the main issue of the production process. The
thickness along the pressing direction was up to 11% greater than
designed and varied slightly with different workpieces and different positions.
The modal analysis identified at least ten resonance frequencies
of the steel specimens and their Eigenforms. The three most critical resonance frequencies with the highest amplitudes appeared
at 3327 Hz, 6649 Hz and 7500 Hz. The first Eigenform at 3327
Hz was an expansion/compression alternating in the X and Y
directions (Figure 4). The fifth Eigenform at 6649 Hz was featured with expansion/compression at two ends while opposite in
the middle, which forms a shape of "chips bag" at a certain time
point. The ninth at 7500 Hz was a bending movement in the Y-Z
plane. With the FMEL specimens, however, only the first reso-

jec composites magazine / N°133 March - April 2020



JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020

Cover
Edito
“For the past 130 years, every aspect of tire performance has been improved, except for one”
Contents
NEWS
In brief
Agenda
Aerospace
BUSINESS
Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
Trends - Automotive: what will be tomorrow’s reality?
Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
China - China’s glass fibre industry is entering a new cycle
MANUFACTURING
Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
Simulation - New updates for the Composite Materials Module’s users
Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
PREVIEW JEC WORLD 2020
- EDUCATION & KNOWLEDGE
- MARKET OVERVIEW / Fact & figures
- AT THE FOREFRONT IN JEC WORLD 2020
- VIEW FROM THE TOP
- INNOVATION
- SUSTAINABILITY
- END-USE MARKETS
- PROCESS & AUTOMATION
- INTERNATIONAL
SOLUTIONS
Book - Composites in infrastructure
Construction - Composites joining science and religion
Urban equipment - Composite infrastructure products: a new alternative for the construction industry
Aeronautics - To new horizons, with composites
Aeronautics - Thermoplastic composite bracket for aircraft engines
Off shore wind energy - Taming the offshore winds
Biocomposites - Where are natural fibre composites heading?
Natural fibres - The challenges of building large structures from flax fibre composite
TECHNOLOGY
Resin - Properties and composite applications of nanocalcitemodified epoxies
Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CF
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - CB
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Cover
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 2
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Edito
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - “For the past 130 years, every aspect of tire performance has been improved, except for one”
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 5
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Contents
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 7
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - In brief
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 9
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 10
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Agenda
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 13
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Strategy - Selling your business, Part 1: maximizing value on both sides of the deal
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 15
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 16
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Trends - Automotive: what will be tomorrow’s reality?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 18
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 19
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Boatbuilding - Maritime and shipbuilding sector: a niche market with growth potential
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 21
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - China - China’s glass fibre industry is entering a new cycle
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 23
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 24
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Fabrics - GaplessWeave process for higher-quality carbon fibre fabrics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 26
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 27
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 28
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Electric vehicle - The potential of epoxy SMC in electro-mobility battery systems
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 30
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 31
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Simulation - New updates for the Composite Materials Module’s users
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 33
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aerospace - lnfused primary structures: the gateway to tomorrow’s air mobility
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 35
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 36
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aircraft interiors - New core filler for aircraft interiors: reduced material, weight and manufacturing costs
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 38
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Sustainability - Eco Impact Calculator, a Life Cycle Assessment tool for the composites industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 40
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 41
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 42
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 43
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 44
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - EDUCATION & KNOWLEDGE
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 46
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - MARKET OVERVIEW / Fact & figures
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - AT THE FOREFRONT IN JEC WORLD 2020
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 49
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 50
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 51
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - VIEW FROM THE TOP
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 53
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 54
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 55
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INNOVATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 57
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 58
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 59
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 60
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 61
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 62
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 63
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 64
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 65
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 66
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 67
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 68
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 69
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - SUSTAINABILITY
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 71
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - END-USE MARKETS
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 73
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 74
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 75
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 76
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 77
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 78
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 79
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - PROCESS & AUTOMATION
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 81
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 82
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 83
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 84
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 85
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 86
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 87
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 88
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 89
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 90
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - - INTERNATIONAL
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 92
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 93
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 94
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 95
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 96
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 97
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 98
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 99
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 100
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 101
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 102
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 103
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 104
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 105
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 106
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 107
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 108
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 109
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 110
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 111
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 112
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 113
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 114
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Book - Composites in infrastructure
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 116
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 117
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Construction - Composites joining science and religion
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 119
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 120
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 121
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Urban equipment - Composite infrastructure products: a new alternative for the construction industry
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 123
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - To new horizons, with composites
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 125
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 126
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Aeronautics - Thermoplastic composite bracket for aircraft engines
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 128
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Off shore wind energy - Taming the offshore winds
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 130
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 131
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 132
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Biocomposites - Where are natural fibre composites heading?
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 134
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 135
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Natural fibres - The challenges of building large structures from flax fibre composite
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 137
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 138
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Resin - Properties and composite applications of nanocalcitemodified epoxies
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 140
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 141
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 142
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 143
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 144
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 145
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 146
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 147
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Inside the lab - Architected Material and Structures (AMS), a team from Navier Laboratory (Ecole des Ponts ParisTech/IFSTTAR/CNRS)
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 149
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 150
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - FMEL - Fibre-metal elastomer laminates – Lightweight components with superior damping characteristics
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 152
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 153
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 155
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 156
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 157
JEC COMPOSITES MAGAZINE - Issue #133 - March/April 2020 - 158
https://www.nxtbook.fr/newpress/jeccomposites/jcm2211_148
https://www.nxtbook.fr/newpress/jeccomposites/jcm2209_147
https://www.nxtbook.fr/newpress/jeccomposites/jcm2206_146
https://www.nxtbook.fr/newpress/jeccomposites/jcm2204_145
https://www.nxtbook.fr/newpress/jeccomposites/jcm2201_144
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com