AFP/ATL device using a parallel link mechanism Fig. 1: AFP/ATL device, parallel link mechanism Tab.1: Equipment specifications (target) Machine Size 3m(W)×4.5m(D)×2.5m(H) Work Size 1m(W)×1m(D)×0.4m(H) Tape type/Width Thermoplastic or Dry / 50mm max. Placement speed Max. 1000mm/sec *depend on geometry and material Conclusion Taking advantage of the parallel link mechanism's features, Toray Engineering is working on the development of a CFRP/CFRTP tape attachment method using an adhesive. With the aim of reinforcing automotive parts using a parallel link AFP/ATL device and an adhesive process, their objective is to establish a technology for attaching the required amount to the required location at high speed. Toray Engineering strives to provide solutions to multi-material needs. Fig. 2: Attaching UD tape to a 3D workpiece with a parallel link mechanism More information: www.toray-eng.com For Automated Processing Thermoplastic Composite Materials www.suprem.ch N°139 March - April 2021 Tailored to Your Application / jec composites magazine 27http://www.toray-eng.com http://www.suprem.ch