JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 38

FEATURE application

are >2 times the size they need will finally
be in the past. Composite materials will
be an important part of it.

Distributed digital drive technology in modular construction

trains involved in the drive can be operated continuously within the optimal efficiency range. The no-load torque of the
mechanical drive or the individual power
trains is likewise reduced by several times
compared to the state of the art. As a
result, the drive system has a very high
level of overall efficiency, an optimized
energy balance, and therefore low energy
costs. And since the motor and the power
transmission components constantly run
in their optimal efficiency range, most of
the drive output is utilized efficiently in
the process itself.
Towards the fourth
industrial revolution
The so-called " safety cushion " found its
way into machines at the beginning of the
third industrial revolution in the 1980s
and 1990s. At that time, every machine
was equipped with switching gearboxes
and continuously variable transmissions
(CVT) as standard, but today there is a
large motor that is dimensioned for the
maximum required torque of the machine
and a beefy single-line gearbox that is
dimensioned for the maximum required
machine speed. When energy costs were at
€0.05/kWh, no one cared about energy
costs. But these days, the price is more like
€0.15/kWh. So a rethink is in order. The
Smart Factory, based on cyber-physical

38

systems, is still in the developmental
phase. It will take another few years until
they have penetrated all areas of industry.
The third industrial revolution cut back
on mechanical drive engineering in the
machines and inflated reliance on electrical engineering. The fourth industrial
revolution will bring back part of the mechanics. At that time, mechatronics will
have asserted itself definitively. The era in
which machine builders use motors that

Drive system predestined for E mobility

jec composites magazine / N°139 March - April 2021

Electric drive technology
Electric drive technology is one of the
most important industrial technologies.
In the industrial sector, more than 6,000
TWh of electrical power is globally converted into mechanical power by electric
drives; this corresponds to approximately
27% of the global electricity production
(source: Siemens). In Germany, the
largest consumer of electricity is the
industrial sector with 46% of total electricity consumption (250 TWh or 900
petajoules). 70% of this immense amount
is accounted for by electric motors and
electromotive systems (175 TWh or 630
petajoules) (source: ABB).
In this context, the market potential for
Kabel.Consult.Ing's innovation is really
important: more than 10,000 units in the
next 20 years only in the wire and cable
industry, and more than 1,000,000 units
in the next 20 years in other industry
sectors.
More information:
www.kabelconsulting.de


http://www.kabelconsulting.de

JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021

Cover
Edito
“We are proud that the HP name has become increasingly popular on the track”
Contents
NEWS
In brief
Raw materials
Agenda
BUSINESS
Matrix - The future of thermoplastic resins
China - “The past three years witnessed very strong growth of the 3D printing market in Asia”
Startup - Setting off to conquer the great outdoors
Reinforcement - BCF: developing industrial production for reinforcement materials and composites
MANUFACTURING
Automation - ATL/AFP device using a parallel link mechanism
Robotization - Bringing Robot-controlled sealing of aircraft components to industrial maturity
Pipes - Redefining GRP and GRE pipe manufacturing
FEATURE - Composites in industry: Strong potential
4D Printing - Printing continuous fibrereinforced parts with industrialgrade AFP tape
Application - Energy-efficient hybrid drive system with a planetary gear
Trends - Composites in U.S. industrial equipment: perspectives on performance
Robotics - “Robotics skills meet high demand in post-Corona recovery”
Milling - lnnovative new hybrid metal composite four-disc milling cutter reduces machining times by 78%
SOLUTIONS
Medical - The world’s lightest wheelchair
Hunting rifle - RTM carbon fibre stock for a hunting rifle
Composites among us - Electric vehicles
Hand finishing - Surface roughness measurements after hand-finishing of uneven GFRP surfaces
TECHNOLOGY
Out of autoclave - Nextshaft Integral drive shaft
Pitch fibre - Development of a pitchbased carbon fibre, a solution for wide-ranging needs
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Cover
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 2
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Edito
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - “We are proud that the HP name has become increasingly popular on the track”
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 5
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Contents
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 7
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - In brief
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 9
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Raw materials
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 11
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Agenda
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 13
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Matrix - The future of thermoplastic resins
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 15
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - China - “The past three years witnessed very strong growth of the 3D printing market in Asia”
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 17
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Startup - Setting off to conquer the great outdoors
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Reinforcement - BCF: developing industrial production for reinforcement materials and composites
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 20
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 21
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 22
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 23
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 24
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 25
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Automation - ATL/AFP device using a parallel link mechanism
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 27
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Robotization - Bringing Robot-controlled sealing of aircraft components to industrial maturity
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 29
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Pipes - Redefining GRP and GRE pipe manufacturing
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 31
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 32
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 33
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 4D Printing - Printing continuous fibrereinforced parts with industrialgrade AFP tape
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 35
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 36
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Application - Energy-efficient hybrid drive system with a planetary gear
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 38
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Trends - Composites in U.S. industrial equipment: perspectives on performance
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 40
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 41
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 42
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Robotics - “Robotics skills meet high demand in post-Corona recovery”
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 44
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 45
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 46
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 47
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Milling - lnnovative new hybrid metal composite four-disc milling cutter reduces machining times by 78%
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 49
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 50
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Medical - The world’s lightest wheelchair
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 52
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Hunting rifle - RTM carbon fibre stock for a hunting rifle
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Composites among us - Electric vehicles
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 55
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Hand finishing - Surface roughness measurements after hand-finishing of uneven GFRP surfaces
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 57
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 58
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Out of autoclave - Nextshaft Integral drive shaft
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 60
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 61
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Pitch fibre - Development of a pitchbased carbon fibre, a solution for wide-ranging needs
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 63
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 64
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 65
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 67
JEC COMPOSITES MAGAZINE - Issue #139 - March/April 2021 - 68
https://www.nxtbook.fr/newpress/jeccomposites/jcm2211_148
https://www.nxtbook.fr/newpress/jeccomposites/jcm2209_147
https://www.nxtbook.fr/newpress/jeccomposites/jcm2206_146
https://www.nxtbook.fr/newpress/jeccomposites/jcm2204_145
https://www.nxtbook.fr/newpress/jeccomposites/jcm2201_144
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com