JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 71

Mates
sive production process allows a single piece
to be created between the membrane and the
closing edge, ensuring complete sealing even
after thousands of cycles or uses without vacuum
leakage. (Figure 2)
It can be used in autoclave with pressures up
to 13 bar and/or to temperatures greater than
200 °C. A wide range of sizes - from 400x400
mm to 8x8 m (without joints) - and thicknesses
- from 0,7 to 3 mm - allows them to
adapt to a variety of projects. One or more
vacuum valves can be mounted on the bag.
The management of waste from carbon fibres
is becoming a significant societal issue
per RECARBON, an innovative start-up
dedicated to the development of intermediate,
thermoplastic and thermosetting products,
based on recycled carbon fibres. The
start-up's mission is to develop innovative
and sustainable solutions for the industrial
reuse of carbon fibres and other advanced
materials. For decades, the most popular
disposal methods were landfilling and incineration.
Significant economic losses were incurred
from not recovering the fibres. These
methods have led to increasing environmental
awareness to recycling carbon fibres into
a valuable resource and prevent the cumulating
wastes. Currently, the focus is on manufacturing
wastes (prepreg offcuts, obsolete
moulds, faulty parts, etc). However, given the
ever-increasing utilisation of carbon fibres
in various industry applications, end-of-life
wastes are expected to exceed manufacturing
wastes by 500%. RECARBON offers ready
to use intermediate materials like prepregs,
cores and organosheets targeted at high performance
applications in the aircraft, sport
& leisure, industrial and automotive sectors.
(Figure 3 and 4)
Vaber Industriale SpA is one of the historical
exhibitors, who throughout the years
always presented a fine range of products.
This time, in addition to its historical range
of products for the composite sector, it introduced
three new products. Advantseal
FR is an intumescent sealant free from isocyanate
solvents which, in addition to offering
effective passive fire protection, has
also been tested for hydrogen permeability
for use in sealing hydrogen fuel cell compartments
in boats and trains.
Conductive Composite is a range of highly
conductive nickel-coated fabrics that can
be used as substitutes for structural layers
in a composite lay-up. This multifunctional
approach allows conductivity to be easily
incorporated into systems for a wide variety
of applications such as lightning protection
for carbon fibre masts in the marine
industry, integrated heating solutions in
composite panels, and EMI shielding integrated
into composites via non-woven
fabrics.
Pyrophobic Llc's Lithium Prevent is a proprietary
intumescent, injection-mouldable,
or extruded technology to form fire-resistant
battery pack components. The
technology, combined with innovative
designs offers superior fire spread containment
and thermal runaway prevention for
battery systems. Lithium Prevent has been
proven effective through in-house testing,
independent testing and evaluations by
NASA, the FAA and DNV. (Figure 5)
Cannon Ergos, a Cannon Group company
out of Caronno Pertusella, Italy, is working
with Boeing on moulding trials for the feasibility
of using recycled carbon fibre (rCF)
for the fabrication of aircraft cabin interior
sidewall panels. The recovery and reuse of
carbon fibre waste during production processes
and end-of-life applications, such as
automotive and aeronautics, has proved to
be economically viable. Mattia Andolfatto,
Project Manager R&D at Cannon Ergos,
told us that it's been a long time that they
are working on several projects dedicated to
the recycled carbon fibre. They developed a
process for recycled carbon fibre impregnated
with diverse resins, or already integrated
within a thermoplastic matrix. The project
with Boeing demonstrates the viability of
fabricating interior sidewall panels with high
performance thermoplastics reinforced with
recycled carbon fibre.
The project involves Mitsubishi Chemical
Advanced Materials (MCAM), for which
Cannon Ergos has designed, manufactured,
and installed a customised and fully equipped
thermo-compression unit. This equipment
was utilised to produce prototype sidewall
panels with the new KyronTEX® material.
Typical resin matrices implemented for KyronTEX
thermoplastic composite aeronautical
applications include polyamide (PA),
polyetherimide (PEI), polyphenylene sulphide
(PPS), polyetheretherketone (PEEK)
and polyaryletherketone (PAEK).
At JEC, Cannon Afros introduced an innovative
direct resin infusion system to help speed
up wind turbine rotor blade manufacture designed
to improve the cost-efficiency of this
particular manufacturing process.
Cannon's new direct infusion system for polyurethane
and epoxy resin systems leverages
their established DX and DXI series of resin
mixing machine technology with real-time
data management, which
automatically
Fig. 5: Conductive composites
adapts dosing to ensure the required flow rate
at constant mix ratio. (Figures 6 and 7)
Fig. 3 & 4: RECARBON rCF usage examples
Fig. 6: Cannon Afros 737 recycled carbon side
wall prototype
N°146 June - July 2022 / jec composites magazine
71
REVIEW

JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022

Table of Contents for the Digital Edition of JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022

Cover
Edito
«Diversification opens up new perspectives in industry»
Contents
NEWS
In brief
Agenda
Achievement - Belgian-British aviator Zara Rutherford flies around the world in a Shark UL
Transportation - From concept to launch: efficient commercial vehicles
BUSINESS
Association - Lightweight technology opportunities: a B2B event for Indian and European stakeholders
Lightweighting - “The Lightweighting Initiative has long ceased to be a mere networking concept”
MANUFACTURING
AFP - Thermoplastic tape winding: reducing time to market
Filament winding - Filament winding process based on jet nozzle geometry for stealth aircaft
FEATURE SUSTAINABILITY: How is the composite materials industry assuming its responsibility ?
- Biocomposites: Sustainable, multifunctional hemp-based structural composites
- Fabrics: A new generation of sustainable bidirectional fabrics
- Wind: New glass for meeting new challenges
- Automotive: Competitive and sustainable thermoplastic composites for automotive applications
- Bio-resin - PUGreen: a new bio-resin concept for composites processing
- Self-healing material: Why healable composites are key to sustainability
- SMC/BMC: New bio-based composite successfully used
- Functionalization: Electrical functionalised composites by use of recycled carbon fibres
JEC WORLD 2022
- JEC World 2022 surpasses all expectations
- Review of North American Innovations
- JEC World 2022 witnessing a strong impact and an overall positive mood from the DACH region
- Business networking and growth for APAC
- JEC World 2022 Few European highlights
- JEC World 2022 – A natural fibre review
SOLUTION
- 3D printer - Bring your ideas to life
- Natural fibres - European flax and hemp fibres power a more sustainable automotive future
TECHNOLOGY
Additive manufacturing - PA and PETG forcontinuous fibre co-extrusion technology
rCF in additive manufacturing - How and where we found reclaimed Carbon Fibre - for Additive Manufacturing technologies
Index
Advertisers
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Cover
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 2
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Edito
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - «Diversification opens up new perspectives in industry»
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 5
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Contents
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 7
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 8
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - In brief
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Agenda
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Achievement - Belgian-British aviator Zara Rutherford flies around the world in a Shark UL
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 12
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Ad1
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Ad2
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Transportation - From concept to launch: efficient commercial vehicles
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 14
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 15
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Association - Lightweight technology opportunities: a B2B event for Indian and European stakeholders
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 17
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 18
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Lightweighting - “The Lightweighting Initiative has long ceased to be a mere networking concept”
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 20
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 21
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 22
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - AFP - Thermoplastic tape winding: reducing time to market
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 24
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 25
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Filament winding - Filament winding process based on jet nozzle geometry for stealth aircaft
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 27
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 28
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 29
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Biocomposites: Sustainable, multifunctional hemp-based structural composites
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 31
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 32
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Fabrics: A new generation of sustainable bidirectional fabrics
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 34
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 35
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Wind: New glass for meeting new challenges
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 37
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 38
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 39
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 40
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 41
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Automotive: Competitive and sustainable thermoplastic composites for automotive applications
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 43
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 44
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 45
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Bio-resin - PUGreen: a new bio-resin concept for composites processing
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 47
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 48
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 49
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Self-healing material: Why healable composites are key to sustainability
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 51
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - SMC/BMC: New bio-based composite successfully used
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 53
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 54
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Functionalization: Electrical functionalised composites by use of recycled carbon fibres
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 56
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 57
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 58
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - JEC World 2022 surpasses all expectations
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 60
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Review of North American Innovations
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 62
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 63
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 64
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 65
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - JEC World 2022 witnessing a strong impact and an overall positive mood from the DACH region
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 67
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Business networking and growth for APAC
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 69
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - JEC World 2022 Few European highlights
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 71
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 72
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 73
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - JEC World 2022 – A natural fibre review
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 75
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 76
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 77
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 78
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 79
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 80
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - 3D printer - Bring your ideas to life
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 82
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 83
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - - Natural fibres - European flax and hemp fibres power a more sustainable automotive future
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 85
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Additive manufacturing - PA and PETG forcontinuous fibre co-extrusion technology
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 87
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 88
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 89
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 90
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - rCF in additive manufacturing - How and where we found reclaimed Carbon Fibre - for Additive Manufacturing technologies
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 92
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 93
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - Advertisers
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 95
JEC COMPOSITES MAGAZINE - Issue #146 - June/July 2022 - 96
https://www.nxtbook.fr/newpress/jeccomposites/jcm2211_148
https://www.nxtbook.fr/newpress/jeccomposites/jcm2209_147
https://www.nxtbook.fr/newpress/jeccomposites/jcm2206_146
https://www.nxtbook.fr/newpress/jeccomposites/jcm2204_145
https://www.nxtbook.fr/newpress/jeccomposites/jcm2201_144
https://www.nxtbook.fr/newpress/jeccomposites/jcm211_143
https://www.nxtbook.fr/newpress/jeccomposites/jcm2109_142
https://www.nxtbook.fr/newpress/jeccomposites/jcm2107_141
https://www.nxtbook.fr/newpress/jeccomposites/jcm2105_140
https://www.nxtbook.fr/newpress/jeccomposites/jcm2103_139
https://www.nxtbook.fr/newpress/jeccomposites/jcm-experts-digest-additive-manufacturing-2020
https://www.nxtbook.fr/newpress/jeccomposites/jcm2101_138
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_Special_Issue4
https://www.nxtbook.fr/newpress/jeccomposites/jcm2011_137
https://www.nxtbook.fr/newpress/jeccomposites/jcm2009_136
https://www.nxtbook.fr/newpress/jeccomposites/jcm2007_135
https://www.nxtbook.fr/newpress/jeccomposites/jcm_2020_Q1_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_Special_Issue3
https://www.nxtbook.fr/newpress/jeccomposites/jcm2005_134
https://www.nxtbook.fr/newpress/jeccomposites/jcm2003_133
https://www.nxtbook.fr/newpress/jeccomposites/jcm2001_132
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_Special_Issue2
https://www.nxtbook.fr/newpress/jeccomposites/jcm1911_131
https://www.nxtbook.fr/newpress/jeccomposites/jcm1909_130
https://www.nxtbook.fr/newpress/jeccomposites/jcm1907_129
https://www.nxtbook.fr/newpress/jeccomposites/jcm1905_128
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_Special_Issue1
https://www.nxtbook.fr/newpress/jeccomposites/jcm1903_127
https://www.nxtbook.fr/newpress/jeccomposites/jcm1901_126
https://www.nxtbook.fr/newpress/jeccomposites/jcm1811_125
https://www.nxtbook.fr/newpress/jeccomposites/jcm1810_124
https://www.nxtbook.fr/newpress/jeccomposites/jcm1808_123
https://www.nxtbook.fr/newpress/jeccomposites/jcm1807_122
https://www.nxtbook.fr/newpress/jeccomposites/jcm1805_121
https://www.nxtbook.fr/newpress/jeccomposites/jcm1804_120
https://www.nxtbook.fr/newpress/jeccomposites/jcm1803_119
https://www.nxtbook.fr/newpress/jeccomposites/jcm1802_119-Supplement_Innovation_Report
https://www.nxtbook.fr/newpress/jeccomposites/jcm1801_118
https://www.nxtbook.fr/newpress/jeccomposites/jcm1711_117
https://www.nxtbook.fr/newpress/jeccomposites/jcm1710_116
https://www.nxtbook.fr/newpress/jeccomposites/jcm1708_115
https://www.nxtbook.fr/newpress/jeccomposites/jcm1707_114
https://www.nxtbook.fr/newpress/jeccomposites/jcm1706_113
https://www.nxtbook.fr/newpress/jeccomposites/jcm1704_112
https://www.nxtbook.fr/newpress/jeccomposites/jcm1703_111
https://www.nxtbook.fr/newpress/jeccomposites/jcm1701_110
https://www.nxtbook.fr/newpress/jeccomposites/jcm1611_109
https://www.nxtbook.fr/newpress/jeccomposites/jcm1610_108
https://www.nxtbook.fr/newpress/jeccomposites/jcm1608_107
https://www.nxtbook.fr/newpress/jeccomposites/jcm1607_106
https://www.nxtbook.fr/newpress/jeccomposites/jcm1605_105
https://www.nxtbook.fr/newpress/jeccomposites/jcm1604_104
https://www.nxtbook.fr/newpress/jeccomposites/jcm1603_103
https://www.nxtbook.fr/newpress/jeccomposites/jcm1601_102
https://www.nxtbook.fr/newpress/jeccomposites/jcm1511_101
https://www.nxtbook.fr/newpress/jeccomposites/jcm1510_100
https://www.nxtbook.fr/newpress/jeccomposites/jcm1509_99
https://www.nxtbook.fr/newpress/jeccomposites/jcm1507_98
https://www.nxtbook.fr/newpress/jeccomposites/jcm1505_97
https://www.nxtbook.fr/newpress/jeccomposites/jcm1504_96
https://www.nxtbook.com/newpress/jeccomposites/jcm1503_95
https://www.nxtbook.com/newpress/jeccomposites/jcm1501_94
https://www.nxtbook.com/newpress/jeccomposites/jcm1412_93
https://www.nxtbook.com/newpress/jeccomposites/jcm1410_92
https://www.nxtbook.com/newpress/jeccomposites/jcm1409_91
https://www.nxtbook.com/newpress/jeccomposites/jcm1406_90
https://www.nxtbook.com/newpress/jeccomposites/jcm1405_89
https://www.nxtbook.com/newpress/jeccomposites/jcm1404_88
https://www.nxtbook.com/newpress/jeccomposites/jcm1403_87
https://www.nxtbook.com/newpress/jeccomposites/jcm1401_86
https://www.nxtbook.com/newpress/jeccomposites/jcm1311_85
https://www.nxtbook.com/newpress/jeccomposites/jcm1310_84
https://www.nxtbook.com/newpress/jeccomposites/jcm1308_83
https://www.nxtbook.com/newpress/jeccomposites/jcm1307_82
https://www.nxtbook.com/newpress/jeccomposites/jcm1305_81
https://www.nxtbook.com/newpress/jeccomposites/jcm1304_80
https://www.nxtbook.com/newpress/jeccomposites/jcm1303_79
https://www.nxtbook.com/newpress/jeccomposites/jcm1301_78
https://www.nxtbook.com/newpress/jeccomposites/jcm1212_77
https://www.nxtbook.com/newpress/jeccomposites/jcm1210_76
https://www.nxtbook.com/newpress/jeccomposites/jcm1208_75
https://www.nxtbook.com/newpress/jeccomposites/jcm1207_74
https://www.nxtbook.com/newpress/jeccomposites/jcm1206_73
https://www.nxtbook.com/newpress/jeccomposites/jcm1204_72
https://www.nxtbook.com/newpress/jeccomposites/jcm1203_71
https://www.nxtbook.com/newpress/jeccomposites/jcm1201_70
https://www.nxtbook.com/newpress/jeccomposites/jcm1111_69
https://www.nxtbook.com/newpress/jeccomposites/jcm1110_68
https://www.nxtbook.com/newpress/jeccomposites/jcm1108_67
https://www.nxtbook.com/newpress/jeccomposites/jcm1107_66
https://www.nxtbook.com/newpress/jeccomposites/jcm1105_65
https://www.nxtbook.com/newpress/jeccomposites/jcm1104_64
https://www.nxtbook.com/newpress/jeccomposites/jcm1103_63
https://www.nxtbook.com/newpress/jeccomposites/jcm1101_62
https://www.nxtbook.com/newpress/jeccomposites/jcm1011_61
https://www.nxtbook.com/newpress/jeccomposites/jcm1010_60
https://www.nxtbook.com/newpress/jeccomposites/jcm1009_59
https://www.nxtbook.com/newpress/jeccomposites/jcm1006_58
https://www.nxtbook.com/newpress/jeccomposites/jcm1005_57
https://www.nxtbook.com/newpress/jeccomposites/jcm1004_56
https://www.nxtbook.com/newpress/jeccomposites/jcm1003_55
https://www.nxtbook.com/newpress/jeccomposites/jcm1001_54
https://www.nxtbook.com/newpress/jeccomposites/jcm0911_53
https://www.nxtbook.com/newpress/jeccomposites/jcm0910_52
https://www.nxtbook.com/newpress/jeccomposites/jcm0909_51
https://www.nxtbook.com/newpress/jeccomposites/jcm0907-08_50
https://www.nxtbook.com/newpress/jeccomposites/jcm0906_49
https://www.nxtbook.com/newpress/jeccomposites/jcm0904_48
https://www.nxtbook.com/newpress/jeccomposites/jcm0903_47
https://www.nxtbook.com/newpress/jeccomposites/jcm0901_46
https://www.nxtbook.com/newpress/jeccomposites/jcm0811_45
https://www.nxtbook.com/newpress/jeccomposites/jcm0810_44
https://www.nxtbook.com/newpress/jeccomposites/jcm0809_43
https://www.nxtbook.com/newpress/jeccomposites/jcm0807_42
https://www.nxtbook.com/newpress/jeccomposites/jcm0806_41
https://www.nxtbook.com/newpress/jeccomposites/jcm0805_40
https://www.nxtbook.com/newpress/jeccomposites/jcm0803_39
https://www.nxtbook.com/newpress/jeccomposites/jcm0801_38
https://www.nxtbook.com/newpress/jeccomposites/jcm0712_37
https://www.nxtbook.com/newpress/jeccomposites/jcm0710_36
https://www.nxtbook.com/newpress/jeccomposites/jcm0709_35
https://www.nxtbook.com/newpress/jeccomposites/jcm0707_34
https://www.nxtbook.com/newpress/jeccomposites/jcm0706_33
https://www.nxtbookmedia.com