ASHRAE Journal Supplement - AMCA InMotion - November 2024 - 6

■ jet fan
■ large-diameter ceiling fan
■ louver
■ mixed-fl ow fan
■ positive-pressure ventilator
■ power roof ventilator
■ propeller fan
■ single-room air handler
■ spiral duct
■
transverse duct connector
The products AMCA International certifi es are serially
CRP Publications
Each of the following is available to download
free of charge at https://bit.ly/AMCA_Store:
■
■
AMCA Publication 111-13, Laboratory
Accreditation Program
■
AMCA Publication 211-22 (Rev. 01-23),
Certifi ed Ratings Program Product Rating
Manual for Fan Air Performance
■
AMCA Publication 311-16, Certifi ed
Ratings Program Product Rating Manual
for Fan Sound Performance
■
AMCA Publication 511-21 (Rev. 12-22),
Certifi ed Ratings Program
Product Rating Manual for Air
Control Devices
■
AMCA Publication 512-23,
AMCA Listing Label Program
■
AMCA Publication 513-14,
Economizer Damper and
Return Air Damper Secondary
Labeling Program
■
AMCA Publication 611-15,
Certifi ed Ratings Program - Product
Rating Manual for Airfl ow Measurement
Stations
■
AMCA Publication 1011-03 (R2010), Certifi
ed Ratings Program - Product Rating
Manual for Acoustical Duct Silencers
6
2024 AMCA inmot ion
AMCA Publication 11-22, Certifi ed Ratings
Program Operating Manual
produced, meaning designed and fabricated for generalpurpose
installations. (Custom products cannot be
certifi ed but can be tested in accordance with AMCA
International-approved standards.)
All testing is performed in the AMCA International
laboratory in Arlington Heights, Ill.; the Asia AMCA
laboratory in Johor, Malaysia; or an independent AMCA
International-accredited laboratory (Figure 1).
After a product has been tested and its cataloged
ratings have been approved, the product is certifi ed to
bear an AMCA CRP seal. AMCA International offers 17
certifi cations:
■
Acoustic Duct Silencer
■ Air Leakage
■ Air Performance
■ Airfl ow Measurement Station
■ CFM per Watt
■ Circulating Fan Performance
■ Effi ciency
■ Energy Star
■ FEG (fan effi ciency grade)
■ FEI (fan energy index)
■ Induced Flow Fan
■ Jet Fan
■ Positive Pressure Ventilator
■ Sound
■ Water Penetration
■ Wind Driven Rain
■
Wind Driven Sand
With some product types, more than one certifi cation
can be earned, in which case the certifi cations usually
are combined on the seal. AMCA CRP seals are affi xed
to equipment and used in product catalogs and sizing/
selection software in accordance with procedures set
forth in AMCA CRP publications (see sidebar " CRP
Publications " ).
For an overview of the certifi cations, program documents,
and test/rating standards associated with the
products within the scope of the AMCA CRP, see Table 1.
Once a product line is certifi ed, it is subject to check
tests every three years. After a product has passed three
successive check tests, a longer interval between subsequent
check tests is allowed.
The AMCA International certification process is
www.amca.org
https://bit.ly/AMCA_Store http://www.amca.org
ASHRAE Journal Supplement - AMCA InMotion - November 2024

Table of Contents for the Digital Edition of ASHRAE Journal Supplement - AMCA InMotion - November 2024
