Sure-Board® | Series 200S-F/200S-P Floor/Roof Sheathing Expanding Your Structural Floor and Roof Sheathing Solutions CEMCO® introduces our newest innovation, Sure-Board® Series 200S-F (FLOOR & FLAT-ROOF) and Series 200S-P (PITCHED ROOF) sheathing products. Series 200S-F/200S-P panels are available as follows: Series 200S-F (FLOOR & FLAT-ROOF): * Size: 3/4" x 48" x 48" * Steel thickness: 33 mil Series 200S-P (PITCHED ROOF): * Size: 1/2" x 48"x 48" 2" Overlap for Blocking * Steel thickness: 33 mil 0.033 (Min) Benefits of Sure-Board® Series 200S-F/200S-P floor and roof sheathing products include: * Structural sheathing panels attachment to cold-formed steel framed floor/roof systems by screws. * Full 2" steel overlap eliminating the need for horizontal blocking at joints. * 48" x 48" panels require single installer. 48" * Less expensive to install than other non-combustible sheathing options. 50" * Meet or exceed 2006, 2009, 2012, & 2015 IBC and IRC requirements- IAPMO ER 185. * Meet or exceed 2013/2016 California Building and California Residential Codes-IAPMO ER 185. * DSA Approved IR A-5. * UL Fire Test for 1 and 1-1/2-hour assembly-UL H503. Typical Fiber Cement Sheathing (1/2" or 3/4" Thickness) * Several sound tested assemblies each exceeding an STC of 50. Click here or scan the code to view the SEISMIC TESTS conducted at UCSD's Shake Table! Innovative Products | www.cemcosteel.com | 800.775.2362 7https://www.youtube.com/watch?v=3iacNyV_UqI http://www.cemcosteel.com