PABCO® Gypsum Products STANDARD INTERIOR PRODUCTS PABCO® REGULAR PABCO® Regular Gypsum Drywall is an interior panel composed of a naturally noncombustible, dimensionally stable, gypsum core. The core is wrapped in high quality 100% recycled facing and backing paper that will accept most decorative finishes. Regular Gypsum Wallboard is intended for non-fire rated residential construction. 1/2" Regular is sag resistant and suitable for ceiling applications. Thickness Type UL Core 1/4" 3/8" 1/2" Regular Regular Regular N/A N/A N/A Thickness Type UL Core 1/2" 5/8" 5/8" 3/4" Super C Type X Type C Type X PC-C PG-11 Type C PG-13 Thickness Type UL Core 1/2" LiteCore N/A Thickness Type UL Core 3/8" FLEX N/A Thickness Type UL Core 1/2" Regular N/A Thickness Type UL Core 3/4" Type X PG-13 PABCO FLAME CURB® PABCO FLAME CURB® family of gypsum panels are composed of a naturally noncombustible, fire-resistant gypsum core, reinforced with glass fibers that provide increased strength and enhanced fire-resistant properties. The core is wrapped in high quality 100% recycled facing and backing paper that will accept most decorative finishes. FLAME CURB® is intended for fire-rated interior walls and ceilings in residential or commercial construction. PABCO LITECORE® PABCO LITECORE® is a light weight, dual purpose drywall product for use on walls and ceilings. It is dimensional stability; resists sagging, buckling and warping. This panel features a naturally noncombustible gypsum core and high quality 100% recycled facing and backing paper will accept most decorative finishes. It is not intended for load bearing or fire rated assemblies. PABCO® FLEX PABCO FLEX™ gypsum panels are ideal for concave and convex surfaces in nonstructural walls and ceilings. The unique thickness of our PABCO FLEX Drywall allows you to create a curved wall with a single layer application and feather the finish into an adjoining flat wall surface. PABCO® INTERIOR CEILING PABCO® INTERIOR CEILING board is designed for interior ceiling applications. PABCO INTERIOR CEILING board is manufactured with specific additives that add to its dimensional stability and significantly reduced the potential for ceiling sag, When tested to the ASTM C 473 humidified deflection test, PABCO INTERIOR CEILING board exceeds the allowable deflection permitted for 5/8" thick panels. PABCO® SOUND CURB SOUND CURB™ panels with Quiet® core gypsum technology are engineered to reduce sound transmission in floor/ceiling applications. SOUND CURB™ panels are ideal for most multilevel residential or light-commercial projects where fire resistance is a primary objective and where additional mass is desired for improved Sound Transmission Class (STC) and Impact Insulation Class (IIC) performance, especially in lower frequencies where sound control is proven difficult.