SPECIAL SIZES AVAILABLE! Contact Stockton Custom Fabrication at (877) 786-2587 NEW D-T: Drift Track NEW SLT: Slotted Slip Track ● Special Sizes Available ● Available in Galvanized Steel Our Drift Track is a deflection track with slots in the legs to allow for vertical deflection, and slots in the web to allow for horizontal drift when required by seismic designs. Giving you head of wall vertical deflection and the added horizontal drift movement. The top of the stud floats within the track legs. This connection allows for vertical movement without transferring the loads to the wall studs themselves. ● Special Sizes Available ● Available in Galvanized Steel Our Slip Slotted Track is a deflection track with slots in the legs to allow for vertical deflection. Giving you head of wall vertical deflection and the added horizontal drift movement. The top of the stud floats within the track legs. This connection allows for vertical movement without transferring the loads to the wall studs themselves. NEW DLT: Deep Leg Track ● Special Sizes Available ● Available in Galvanized Steel The deflection track is used to align the studs vertically and the deflection of the building structure at the head of wall. Allows the top of the wall stud to float within the track legs. The wall studs are not fastened to the track. 1-87-STOCKTON ©1949-2020 Stockton Products. All rights reserved worldwide. STU: Custom Stud ● Available in Punched or Unpunched ● Available in Galvanized Steel (GS) Stockton Products' Custom Stud, produced to ASTM C955 standards, for load-bearing and curtain-wall framing. We offer our custom studs punched to allow conduit installation and wall bridging, or unpunched if preferred. Custom sizes and hole placement is available upon request. www.StocktonProducts.comhttp://www.StocktonProducts.com