ARH-1 Maximum Recommended Steady Load* Static Deflection at Maximum Load Hanger Model Number Color Code Identification :* NOTE: This is not the hanger failure point but the maximum actual steady load we recommend. All hanger sizes have been tested to more than 750 pounds with no sign of fracture. Load Deflection Curves SUGGESTED SPECIFICATIONS ARH-1-20 ARH-1-40 ARH-1-70 Isolation hangers shall be incorporated, in series, Load In Pounds into the suspension system at all points of support. The isolation medium shall be high tensile gum rubber, to assure resilience, with an anti-ozonant added, to assure long life. The metal structural portion of the hanger shall be 11 gage zinc coated steel wire forms interlocked through holes in zinc coated steel pressure plates and swaged in place to provide failsafe construction. Rubber collars shall be provided at the points where the wire forms pass through the pressure plates to prevent metal-to-metal contact. Hangers shall be type ARH-1 supplied by: TARGET ENTERPRISES, INC. P.O. BOX J; RANDOLPH, VT 05060-0170 (802) 728-3081 FAX (802) 728-4721 SELECTING THE CORRECT HANGER SIZE 65 lbs. 5/16 " 120 lbs. 1/4 " BLACK 200 lbs. 3/16 " ARH -1-20 ARH - 1-40 ARH -1-70 RED BLUE Static Deflection In Inches