CUSTOM FABRICATED METAL * METAL TRIMS WIRE CORNERS * EXTRUDED ALUMINUM Wire Corner Products From Stockton Products™ With more than 70 years of service to lath and plaster professionals, you can rely on Stockton Products™ to deliver quality wire products. CA: CornerAid® * Available in Galvanized or Stainless Steel The premier product used for exterior corner reinforcing with conventional 3-coat 7/8 " stucco. It features a five nose wire configuration that develops a strong, mechanical bond and a solid plaster corner. Full ninewire construction yields a rigid straight corner. Stockton Products™ manufacturer of, CornerAid® was the inventor of, and is the only - the leading wire corner in the world. PNCB: Plastic Nose Cornerbead * Available in Galvanized or Stainless Steel This is the premium five nose wire CornerAid® with a high impact, non-rusting plastic nose and is excellent for heavy rain, high humidity and salt air climates. It is also useful to the fireproofing industry for boxed and contoured " I " beams. Standard 2 3/8 " legs. Available in stainless steel to be used with absolute confidence in corrosive environments. CAN BE CURVED AA: ArchAid® * Available in Galvanized or Stainless Steel Designed for smooth, symmetrical arches and curves with minimal distortion. Enables faster construction of inside and outside curves. It has standard 2 3/8 " legs; one is rigid and one is flexible to allow tailoring to the individual arch or curved radius. Available in stainless steel. BNII: Bullnose II * Available in Galvanized or Stainless Steel Used when the strongest rounded corners are desired. Comes with a standard 7/16 " radius and 2 3/8 " legs. DoubleWire has an additional line wire on the outside edges to provide additional nail points. Extra nose wires provide increased structural rigidity. SAII: StocktonAid® II * Available in Galvanized or Stainless Steel DoubleWire has an additional line wire on the outside edges to provide additional nail points. Three nose wire lower cost product used for exterior corner reinforcing with conventional 3-coat 7/8 " stucco. Available in stainless steel to be used with absolute confidence in high humidity and salt air environments. 2 3/8 " legs. WA: WeepAid® * Available In 7/8 " and 1 1/2 " Flange * Available in Galvanized or Stainless Steel Designed to act as a foundation screed for conventional 3-coat 7/8 " stucco, WeepAid® maximizes the weep area and reduces the opportunity for stucco to stain or crack. Allows any moisture that gets behind the stucco to drain. Easy to tailor and trim. Can be used to form pop-outs around windows and doors as well as other " Ginger-Bread " details. 877-786-2587 * StocktonProducts.com ©1949-2022 Stockton Products. All rights reserved worldwide. Product illustrations are for reference only. CALIFORNIA RESIDENTS: Please review our Prop 65 statement at stpro.us/P65 or visit www.P65Warnings.ca.govhttp://www.StocktonProducts.com http://www.stpro.us/P65 http://www.P65Warnings.ca.gov