"The table is 192" long and 90" wide, which we created in four sections (two pieces 46" x 78" and two pieces 46" x 121") on one-inch MDF core," Curry explains. "Each quadrant of the table is matched to the center corner of each panel with aligning hardware and draw bolts 48 I designsolutions fall 2020 for final alignment. This way all four corners meet at the focus point for the table, thus creating an off-center pie match. As an added flair, an inlay of the company's logo in stainless steel, was routed into the tabletop, at the intersection of the fourpiece top." Caracole wanted a veneer with a contemporary and luxurious look, notes Sam Parisette-Herzog of Herzog Veneers. "We recommended our custom dyed Eucalyptus. It is a light silver grey with a heavy block mottle figure. All our dyed veneers are processed using an aniline dye that penetrates through the entire thickness of the veneer. This enhances the luster of the grain and figure, giving a more luxurious look than can be achieved with just surface staining. Each log is hand selected to maintain our strict quality control standards, as not every log