NEW AWI STANDARDS NOW AVAILABLE. Four New Standards Now in Effect On March 15, 2019, four new AWI Standards officially took the place of their respective sections of the Architectural Woodwork Standards, Ed. 2 (AWS2). This means that projects bid on or after March 15 are subject to the new standards, plus applicable remaining sections of the AWS2. Projects bid prior to March 15 are subject to the AWS2 as the standard of reference. For projects where the AWS, Edition 2, 2014 is referenced in the project specifications, the standard of reference remains the AWS Edition 2, 2014 regardless of bid date. New Sections 4ANSI/AWI 0620 - FINISH CARPENTRY/INSTALLATION - 2018 standard replaces the installation portions near the end of each respective section of the AWS2. 4AWI 100 - SUBMITTALS take the place of the requirements in Section 1 of the AWS2. 4AWI 200 - CARE & STORAGE replaces the requirements set forth in Section 2 of the AWS2. 4AWI 300 - MATERIALS replaces Sections 3 and 4 of the AWS2. Download these standards at www.awinet.org under the "store" tab. A Redline Edition of the AWS2 with watermarks denoting the appropriate standard to follow is also available. For assistance, AWI members may contact the AWI National Testing Center at 229-3892544 or help@awinet.org.http://www.awinet.org