TIGHT BUFFER Premises Distribution Indoor/Outdoor Plenum Rated -40˚C 75˚C MAX 144F TEMPERATURE RATING PDP-I/O Operation -40°C to +75°C Storage -40°C to +85°C Installation 0°C to +75°C Sample Part Number: PDP024FB3010/F5-I/O-C4(AQU) Plenum-rated indoor/outdoor cable is designed for LAN/WAN campus and building backbone cabling infrastructure. FLAME RATING Riser OFNP/FT6 Indoor/Outdoor | 900 μm tight buffer | Water blocked | Sunlight Resistant * Plenum rating enables installations to go * Fungus and sunlight resistant directly from outside plant into building with * Designed for outside plant installation in conduit Indoor/Outdoor | 900 μm tight buffer | Water blocked | Sunlight Resistant no transition point requirement under the frost line (non-aerial lashed) ** High tensile strength, crush-resistant pulling distancesresistant possible due to high Plenum rating enables installations and to go directly * *Greater Fungus and sunlight small-diameter all dielectric designwith no transition strength from outside plant into building *tensile Designed for outside plant installation in conduit point for requirement frost line (non-aerial lashed) * Ready direct termination, no fan-out kits * Lowunder cablethe plant maintenance and ease of installation * are High tensile strength, crush-resistant and Greater pullingcable distances possible due to highto needed * *Flexible, reduced diameter with easy access small-diameter all dielectric design tensile strength * Available with Armor-Tek™ Interlocking Armor tight buffer fibers * Ready for direct termination, no fan-out kits * Low cable plant maintenance and ease of installation * Fully water-blocked core or subunits using all dry * Suitable for in-tray applications are needed * Flexible, reduced cable diameter with easy access * technology Available with Armor-Tek™ Interlocking Armor to tight buffer fibers * Fully water-blocked core or subunits using all dry technology SPECIAL OPTIONSfor in-tray applications * Suitable Fiber in a box packaging optional for 6 and 12 fiber constructions. PLENUM (OFNP) RATED TECHNICAL DATA - PHYSICAL Fibers Part Number Prefix 6 PDP006-I/O Diameter in. mm 0.170 4.3 Install Weight lb./kft. kg/km 11 17 Long Term Install Min. Bend Radius Long Term Max. Loading in. cm in. cm lbf. N lbf. N 2.6 6.5 1.7 4.3 150 667 45 200 12 PDP012-I/O 0.205 5.2 16 24 3.1 7.8 2.1 5.2 150 667 45 200 24 PDP024-I/O 0.275 7.0 33 49 4.1 10.5 2.8 7.0 300 1335 90 400 48 PDP12B048-I/O 0.558 14.2 136 202 8.4 21.3 5.6 14.2 600 2670 180 800 72 PDP12B072-I/O 0.671 17.0 212 316 10.1 25.6 6.7 17.0 600 2670 180 800 96 PDP12B096-I/O 0.859 21.8 313 466 12.9 32.7 8.6 21.8 600 2670 180 800 144 PDP12B144-I/O 0.896 22.8 318 474 13.4 34.1 9.0 22.8 1000 4445 300 1335 This is a representative part number listing. For part number details, refer to page 69. If HPD or PEP certification is required, additional lead time may be needed. For details, please contact us at 1-800-BERK-TEK. PAGE 110 | berktek.com 74 | berktek.com Berk-Tek reserves the right to change product numbers and/or product specifications at any time. Berk-Tek reserves the right to change product numbers and/or product specifications at any time.http://www.berktek.us/eservice/US-en_US/navigate_245732/Indoor_Outdoor_Plenum_Premises_Distribution_PDP_I_O_ICP_I_O_.html http://www.berktek.com